Specification Sheet

BACKSET
DIA.
INT.
EXT. EXT.
INT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
INT.
EXT.
2190 WITH 01 LEVER*
OUTSIDE
INSIDE
LOW PROFILE TRIM
2190 WITH 02 LEVER* 2190 WITH 03 LEVER*
2190 WITH MD LEVER
2190 WITH ME LEVER 2190 WITH MG LEVER 2190 WITH MI LEVER
2190 WITH MJ LEVER
2190 WITH MN LEVER** 2190 WITH MV LEVER** 2190 WITH MW LEVER
CUTOUT SAME AS
MS1850S DEADBOLT
PLUS HOLES FOR
HANDLE MOUNTING
8-59/64"
226.6mm
8-59/64"
226.6mm
6-21/32"
169.1mm
1-55/64"
47.2mm
3-3/16"
81mm
2-45/64"
68.7mm
2-51/64"
71mm
4-11/32"
110.3mm
3-19/64"
83.7mm
3-1/4"
82.6mm
C
L
CYLINDER
2101 STRIKE (covers and previous cutout for MS
®
Deadbolt) -
Retrofits 4901 and 4501 strike preparations.
15/64"
6mm
5-3/8"
136.5mm
4-41/64"
117.9mm
37/64"
14.7mm
1-9/64"
29mm
3-3/8"
85.7mm
3-5/32"
80.2mm
2-25/32"
70.6mm
2-15/16"
74.6mm
3-7/32"
81.8mm
3-1/8"
79.4mm
3-9/32"
83.3mm
3-1/4"
82.6mm
5-1/8"
130.2mm
3-11/32"
84.9mm
5"
127mm
4-35/64"
115.5mm
3-17/32"
89.7mm
3-11/16"
93.7mm
4-11/16"
119.1mm
4-29/32"
124.6mm
4-3/8"
111.1mm
4-3/16"
106.4mm
4-5/16"
109.5mm
3"
76.2mm
3"
76.2mm
2-11/16"
68.3mm
2-11/16"
68.3mm
1-23/64"
34.5mm
1-23/64"
34.5mm
2-15/32"
62.7mm
1-9/64"
29mm
63/64"
25mm
63/64"
25mm
3-13/32"
86.5mm
5"
127mm
3-5/16"
84.1mm
3-3/16"
81mm
3-11/32"
84.9mm
4-1/2"
114.3mm
* THE 2190-01, -02, AND -03 LEVER HANDLES ARE DESIGNED TO RETURN WITHIN 1/2" OF THE DOOR FACE.
HANDLES IN THE DESIGNER SERIES DO NOT HAVE THIS SAME FEATURE. PLEASE VERIFY WITH LOCAL CODE REQUIREMENTS TO ENSURE COMPLIANCE.
** HANDED
1"
25.4mm
1"
25.4mm
9/64"
3.6mm
2-1/8"
54mm
1-23/64"
34.5mm
1-1/2"
38.1mm
2-55/64"
72.6mm
6-7/8"
174.6mm
3/4"
19.1mm
11/16"
17.5mm
5/8"
15.9mm
6-13/16"
173mm
5-51/64"
147.2mm
1-1/4"
31.8mm
1-19/32"
40.5mm
4-13/64"
106.8mm
6-57/64"
175mm
1-1/64"
25.8mm
63/64"
25mm
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
MAXIMUM GAP
DOOR TO JAMB:
1/8"
3.2mm
Dimensions Stile Preparation
Jamb Preparation
Latch/Lock, Cylinder &
Level Installation
BACKSET “A”
1-1/8"
28.6
mm
1-25/32"
45.2
mm
1-1/2"
38.1
mm
2-1/4"
57. 2
mm
FOR CLUTCHED EXTERIOR
TRIM SET
ARMORED FACEPLATE
1" X 6-7/8"
FLAT 24-0066-01 (included)
RADIUS 24-0066-02 (included)
RADIUS W/ WEATHERSTRIP
24-0066-03
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
DL-28
DEADLOCKS
DUAL FORCE
®
2190 INTERCONNECTED
DEADBOLT/DEADLATCH