Specification Sheet

Dual Force
®
2190
Interconnected
Deadbolt/Deadlatch
Operation
Key or thumbturn retracts or extends deadbolt or deadlatch.
Inside lever retracts both when configured with interconnect
feature. Outside lever retracts latch only. Latch holdback feature
activated or deactivated by turning key to retract latch and sliding
holdback button on faceplate down to hold and up to release.
Specifications
INTER-CONNECTION
• Field-selectable inter-connection feature allows interior trim
to retract deadbolt and deadlatch. Consult local building
officials for guidance in code compliance. Retrofits to existing
MS1850S Deadbolt or 4500 and 4900 Deadlatch of the same
backset. 1-3/4" minimum door thickness required.
CYLINDER BASKET
• 1-1/8" or 1-1/2" only.
LATCHBOLT/DEADBOLT
• Latchbolt: 5/8" throw of solid brass. Easily reversible using
only a screwdriver. Deadbolt: 1" throw of stainless steel.
AUXILIARY DEADLATCH PIN
• Stainless steel. Deadlocks latchbolt to prevent “loiding” or
case-knife entry.
FACEPLATES
• Measures 1" x 6-7/8". Include FaceStyle faceplate system
that adapts to flat, radius, or beveled door edge. Radius with
weatherseal faceplate available separately.
ALUMINUM
ELECTRIFIED
OPTION
GRADE 1
E82102
The Dual Force 2190 Interconnected Deadbolt/Deadlatch
provides access control and security for aluminum stile
doors. Latch and deadbolt capabilities are combined for
fast, easy, and panic-proof exiting.
Function
The Dual Force 2190 combines the access control capabilities of a latch with
the security of a deadbolt. The key retracts and extends the deadbolt (and
deadlatch) from either side. The exterior lever retracts the latch only, while
the inside lever retracts the deadbolt and latch simultaneously for fast, easy,
panic-proof exiting. Intended for out-swinging doors.
STRIKES
• Standard strike furnished is the 2101-01 for flat jamb where
door closes flush or nearly flush. The 2101 covers MS
®
Deadlock strike preparation with modification, and the 4901
Deadlatch strike directly. Also available in radius version for
opposite stile pairs of doors and with extended lip strikes for
special jamb conditions.
CYLINDER CAM
• The Dual Force 2190 is operable by any standard 1-5/32"
diameter mortise cylinder with MS
®
cam dimensioned as
shown. Cylinders with MS
®
cams can be readily obtained from
most cylinder manufacturers. See CYLINDERS section for
cylinder make, thumbturn and trim ring information.
OPTIONS
• Specify trim option, lever style, finish, and strike. Also adapts
to paddle operator 4591. See 2290 for wood or steel door
version for stile and rail type door construction. Note that the
low profile trim (trim option 3) is recommended for in-swing
door applications. Please refer to 3080 (TRIM) for full offering
of designer handle sets.
ELECTRIFIED TRIM OPTIONS
• Order 2190 Electrification Kit EK-2190 for adding to the
clutched exterior lever. Dual voltage 12/24 VDC rated for
continuous duty operation. Energizing the lever allows exterior
lever to be turned to retract latch only. The electrified option is
not available for low profile trim (trim option 3).
STANDARD PACKAGE
• Individually boxed with trim as specified, strike and machine
screws for mounting. Cylinders available separately. Shipping
weight: 2 lbs.
HOW TO ORDER DUAL FORCE
®
2190 INTERCONNECTED DEADBOLT/DEADLATCH
Specify quantity and the following information. Order related products separately.
PRODUCT NO. BACKSET STRIKE FACEPL ATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH
2190 -3 1 1 -1 01 32D
3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)
4 1-1/2" 1 Standard Flat
2 Dark Bronze
Anodized 313
1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)
2 Radius Strike 3 Black Anodized 335
2 With Electrified
Trim Set
01 Curve 10B Dark Bronze (US10B)
3 Flat/Center
Hung 4"
3 Low Profile Trim 02 Round 32 Bright Stainless (US32)
4 Flat/Center
Hung 4-1/2"
03 Square 32D Satin Stainless (US32D)
DESIGNER SERIES:
MD MJ
ME MN (Handed)
MG MV (Handed)
MI MW
Trim options 1 and 2 are for outswing doors only.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Electrification Accessories Cylinders
2190 Interconnected Deadbolt/Deadlatch can be electrified
in the field using the 2190 Electrification Kit (EK-2190) or it
can be ordered with electrified trim (trim option 2).
Extended lip strikes.
2190 thick door kits.
2190 Interconnected Deadbolt/Deadlatch
is operable by any standard 1-5/32”
diameter mortise cylinder with MS® cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
STANDARD SERIES:
CLUTCHED EXTERIOR
TRIM SET
INTERIOR PASSAGE
LEVER SET
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADLOCKS
DL-27
DUAL FORCE
®
2190 INTERCONNECTED
DEADBOLT/DEADLATCH
DUAL FORCE
®
2190 INTERCONNECTED
DEADBOLT/DEADLATCH