Specification Sheet

STILE
BACKSET
CYLINDER
FLAT
C
L
C
L
RADIUS
BEVEL
C
L
C
L
HOW BACKSET
IS MEASURED:
“A”
1"
25.4mm
5/8"
15.9mm
7/8"
22.2mm
11/32"
8.7mm
6-13/16"
173mm
6-7/8"
174.6mm
6-3/8"
162mm
1-13/32"
35.7mm
1/4"
6.4mm
1/4"
6.4mm
6"
152.4mm
SHOWN WITH
FLAT FACEPLATE
BACKSET MEASURED
AT CENTERLINE OF
STILE NOSE
1-1/4"
31.8mm
DIA. HOLE
6-57/64"
175mm
1-19/32"
40.5mm
5/32"
4mm
(4 PLCS.)
R
1-1/64"
25.8mm
1"
25.4mm
11/16"
17.5mm
LOCK & STILE
CYLINDER
STRIKE
CUTOUT
59/64"
23.4mm
3-3/8"
85.7mm
1-3/8"
34.9mm
MS1950 SERIES DEADLOCK
Dimensions Stile Preparation
Lock & Cylinder Installation
HOW TO ORDER MS1950 SERIES DEADLOCK
Specify quantity and the following information. Order related products separately.
PRODUCT NO. FACEPLATE BACKSET HANDING FINISH
MS195 0 -2 10 -628
0 Flat 2 31/32" 15 LH or RHR 313 Dark Bronze Anodized
1 Radius 3 1-1/8" 16 RH or LHR 335 Black Anodized
1W Radius with weatherstrip 4 1-1/2" 10 Non-Handed* 628 Clear Anodized
2 Bevel
*Any flat or radius faceplate.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders Trim Special Order Options
4015 Threshold Bolt or 4016 Header Bolt
for multi-point locking.
4085 Header Bolt for pairs of doors.
4000, 4001, MS4002 Deadlock Strikes.
Lock mounting accessories and options.
MS1950 Deadlocks are operable
by any standard 1-5/32" diameter
mortise cylinder with MS
®
cam.
Deadlock lever trim and
keyless entry trim.
Exit indicators.
Schoolhouse function
available as special order.
BACKSET "A"
31/32"
24.6
mm
1-5/8"
41.3
mm
1-1/8"
28.6
mm
1-25/32"
45.2
mm
1-1/2"
38.1
mm
2-1/4"
57. 2
mm
ARMORED FACEPLATE
1" X 6-7/8"
FLAT MS1950
RADIUS MS1951
RADIUS W/ WEATHERSTRIP
MS1951W
LH BEVEL MS1952-X15
RH BEVEL MS1952-X16
DL-24
DEADL OCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.