Specification Sheet

UNIT ILLUSTRATED IS MS1861-02. (BOTH HORIZONTAL & VERTICAL BOLTS INCLUDED.)
PART NUMBER FOR VERTICAL BOLT OPERATION ONLY IS MS1861-01. CONVERSION KIT
NO. 4014 AVAILABLE TO CONVERT MS1861-01 TO MS1861-02. SEE BELOW:
3/4"
19.1mm
1"
25.4mm
63/64"
25mm
1"
25.4mm
1-1/4"
31.8mm
3/8"
9.5mm
2-1/2"
63.5mm
1-11/16"
42.9mm
1-55/64"
47.2
mm
3-5/8"
92.1
mm
5-25/64"
136.9
mm
7-15/16"
201.6mm
3/8"
9.5mm
1
3
4
2
1-1/8"
21.6mm
4"
101.6mm
9/16"
14.3mm
BOTTOM RAIL
MTG. WEB
TUBE
SPACER
#10-32
DRILL & TAP
TYP.
DIA.
7/16"
11.1
mm
1/4"
6.4mm
1/2"
12.7mm
9/16"
14.3
mm
7-1/4"
184.2mm
6-1/8"
155.6mm
4"
101.6
mm
2"
50.8mm
DIA.
5-49/64"
146.4
mm
BACKSET
#8-32
DRILL & TAP
TYP.
CYLINDER
MIN.
CHANNEL
DEPTH
THROW
DIA.
BOTTOM
OF DOOR
RAIL
WITHOUT
WEB
TUBE SPACERS MAY BE REQUIRED
TO POSITION LOCK MECHANISM.
BOTTOM DOOR RAILS WITH WEB WILL
REQUIRE MACHINING AS SHOWN. POSITION
OF WEB WILL DETERMINE TUBE SPACER
REQUIREMENT AND TUBE SPACER LENGTH.
MS1861 SERIES BOTTOM RAIL DEADBOLT
Dimensions Rail Preparation
Lock & Cylinder Installation
HOW TO ORDER MS1861 SERIES BOTTOM RAIL DEADBOLT
Specify quantity and the following information. Order related products separately.
PRODUCT NO. BOLT OPERATION FINISH PACKAGING
MS1861 -01 -603
-IB
01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed
02 Vertical and Horizontal Bolts
If tube spacers are required, specify QUANTITY and LENGTH.
RELATED PRODUCTS When purchasing this product, please consider the following related products, available separately:
Accessories Cylinders
4014 Conversion Kit for multi-point locking applications or it can be
ordered with vertical and horizontal bolts (Bolt Operation option 2).
MS1861 Bottom Rail Deadbolts are operable by any standard 1-5/32"
diameter mortise cylinder with MS
®
cam.
FOR MS1861-02
4014 Conversion Kit
To convert MS1861-01 to MS1861-02, 4014 Conversion Kit provides
horizontal bolt assembly with guide and attachment fittings.
The 4014 Conversion Kit consists of:
1
Arm & Bolt Assembly
2
Assembly Pin
3
Bolt Guide Bracket
4
Mounting Screws
To assemble, press pin through disc and arm.
DL-18
DEADL OCKS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.