Specification Sheet

4612 POWER TRANSFER DEVICE
Installation
TYP.
FRAME
FROM
POWER
SOURCE
TO ELECTRIC
HARDWARE
DOOR
#6 X 1"
SELF-TAPPING
SCREW (4)
#8 X 3/8"
PAN HEAD
SCREW (2)
SPRING
M4 SCREW
(2PLCS)
DOOR
DIA.
(2PLCS)
(3 PLCS)
DIA.
3/4"
19.1
mm
10-5/32"
258mm
15/32"
11.9mm
12-23/32"
321.5mm
21/32"
17mm
11-25/32"
299.2mm
15/32"
11.9mm
15-7/16"
392.1
mm
3-1/2"
88.9mm
35/64"
13.9mm
DIA.
9/64"
3.6
mm
10-9/32"
261.18mm
1"
25.4mm
1/8"
3.2mm
6-3/4"
171.5mm
7/16"
11.1mm
15/16"
23.8
mm
1/4"
6.4mm
11/16"
17.5mm
Door and Frame Prep - 105˚ Swing
1. For wood frame, the rectangular cutout is 2” deep minimum.
2. 4612 Power Transfer Device is designed to protect the wire. Care
should also be taken when inserting wires through this device.
3. Only stranded wires to be employed.
4. Size and number of wires must comply with the National Electric Code,
NFPA, and local authorizes having jurisdiction. Wire size shall be at
least 22 gauge.
5. This device is intended for low voltage use only (30 VAC, 42.5 VDC,
10 W max.).
6. Wire should be labeled, appliance wiring material with minimum
1/32” thick insulation.
CASE-KNIFE GUARD
105˚ Swing
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlatches Electric Strikes Exit Devices Trim
4300 Electrified Deadlatch. 7100, 7200, 7400 Series Electric Strikes. All electrified exit devices. 3080 Entry Trim, 3090P/3090C Keyless Entry
HOW TO ORDER 4612 POWER TRANSFER DEVICE
Specify quantity and the following information. Order related products separately.
DOOR SWING
4612 -1
1 105° swing
1SC Swing clear, 90°
2 180° swing
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
P-10
POWER
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.