Specification Sheet

STRIKE WIDTH
VERTICAL
ADJUSTMENT
MS1847
STRIKE
LOCK &
STRIKE
SHIM(S)
AS REQUIRED
BOLT
CLEARANCE
CUTOUT
TYP.
R
10-32 UNF
INSERT REINFORCING
PLATE THROUGH BOLT
CLEARANCE HOLE
SHIM
LENGTH
SHIM WIDTH
‘A’
9/16"
14.3
mm
3-15/16"
100mm
2-13/16"
71.4mm
1-11/16"
42.9mm
2-13/16"
71.4
mm
1-13/16"
46
mm
1-1/8"
28.6mm
1"
25.4mm
4"
101.6
mm
1-1/4"
31.8mm
3/8"
9.5mm
3/8"
9.5mm
2-9/16"
65.1
mm
5/8"
15.9mm
1/2"
12.7mm
3/4"
19.1mm
3/4"
19.1mm
13/32"
10.3
mm
2-9/16"
65.1mm
1-3/16"
30.2mm
1"
25.4mm
7/16"
11.1mm
3-3/8"
85.7mm
3/8"
9.5mm
1/2"
12.7mm
1/8"
3.2mm
53/64"
21mm
ONE OR MORE SHIM’S MAY BE USED
TO ACHIEVE GREATER PROJECTION ‘A’
FROM JAMB (ONE SHIM SHOWN)
SEE TABLE BELOW
FOR HOLE SIZE
CLEARANCE HOLE FOR #10 SCREW
ELONGATED TO ALLOW VERTICAL
ADJUSMENT OF STRIKE
4800 Series
4800 Series
MS4804
MS4804
4800 SERIES STRIKES
APPLICATION PART NO. SHIMS DIMENSION 'A'
METAL JAMBS (furnished with two #8 x 1
sheet metal screws
4801 NONE 0
4801-01 1 3/32" (2.4mm)
4801-02 2 3/16" (4.8mm)
4801-03 3 9/32" (7.1mm)
WOOD JAMBS (furnished with two #8-32 x 7/8"
machine screws and two tee nuts)
4802 NONE 0
4802-01 1 3/32" (2.4mm)
4802-02 2 3/16" (4.8mm)
4802-03 3 9/32" (7.1mm)
HOLE SIZE
METAL JAMB APPLICATION
4801 SERIES
1/8"
3.2mm
(No. 31 DRILL)
WOOD JAMB APPLICATION
4802 SERIES
7/32"
5.6mm
(No. 3 DRILL)
4800, MS4804 STRIKES
Specify quantity and the following information. Order related products separately.
TYPE OF JAMB DIMENSION 'A'
480 1 -02
1 Metal 01 3/32"
2 Wood 02 3/16"
03 9/32"
FINISH
MS4804 -630
630 Satin Stainless
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks
MS1847 Deadlock
Jamb PreparationDimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-12
ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.