Specification Sheet

4800 Series Strikes add aesthetics and finish to strike
cutouts in jambs.
4800 Series Strikes
4800 Series
Function
With vertical adjustment to accommodate door/jamb
misalignment and a shim system for horizontal positioning to
match various jamb bumper designs, the 4800 Series Strikes
can be fit to nearly any sliding door using a mortised MS1847
Deadlock or latch. 4801 strikes are furnished with sheet metal
screws for metal jamb installation. 4802 strikes are furnished
with machine screws and tee nuts which are installed on
the back side of the jamb to provide the strongest possible
anchorage in wood.
Specifications
MATERIAL
• Steel, heat treated. Shims are ABS plastic.
Zinc (603) finish.
MS4804
Function
This reinforcing strike provides strength equal to the strength of
the stainless steel bolt of the MS1847 Deadlock: tested to 1,000
lbs. of force. This strength by far exceeds the standards of the
Architectural Aluminum Manufacturers Association as well as
the strictest current municipal security ordinance.
Specifications
FACEPLATE
• Measures 1/16" x 3/4" x 3-3/8". Steel, plated for corrosion
resistance. MS4804-10 available in stainless steel.
REINFORCING PLATE
• Measures 1/16" x 1/2" x 3-3/8". Steel, plated for corrosion
resistance. Tapped for furnished #10-32 flathead screws.
STANDARD PACKAGE FOR BOTH 4800 AND 4804
• All strikes are individually packaged in envelope with
screws and shim if required.
4800 SERIES STRIKES
MS4804
4801-01
WITH SHIM
HOLLOW
METAL
WOOD
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES
A-11