Specification Sheet

Stile preparation
DUE TO THE VARIETY OF CONSTRUCTION METHODS
EMPLOYED BY EACH DOOR MANUFACTURER,
CONSULT FACTORY FOR GUIDANCE IN SPECIAL
PREPARATION AND INSTALLATION REQUIREMENTS.
INSTALL ADAPTOR ARM TO LOCK FROM TOP WITH
BOLT RETRACTED AS SHOWN. INSTALL PIN THROUGH
SLOTS IN LOCK SIDE PLATES, PASSING THROUGH
HOLES IN BOTH SIDES OF THE ADAPTOR ARM.
4016 HEADER BOLT
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the
following related products, available separately:
This product is compatible with the following products:
Accessories Deadlocks Flushbolts
4015 Threshold Bolt, 4085 Header Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050)
Not applicable to 7/8" backset locks.
1870, 1870HM Cylinder-Operated Flushbolt.
Not applicable to 7/8" backset locks.
4016 HEADER BOLT
Specify quantity and the following information. Order related products separately.
LOCK BACKSET DOOR HEIGHT
4016 -30 -01
10 1-1/2" 01 7' Door
20 31/32" 02 10' Door
30 1-1/8"
Installation
THROW
TOP OF DOOR
BOLT
PROJECTION
SHOWN
EXTENDED
ANY BASIC
MS
®
DEADBOLT OR
1870 FLUSHBOLT
4016-30 FOR
1-1/8" BACKSET
CUT TO
SUIT
CYLINDER
HEIGHT
4016-20 FOR
31/32" BACKSET
4016-10 FOR
1-1/2" BACKSET
4016-20
SHOWN
WITH
MS1851S LOCK
11/16"
17.5mm
5/8"
15.6
mm
1-13/32"
35.7
mm
9/32"
7.1mm
4-3/4"
120.7
mm
Dimensions
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-6
ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.