Specification Sheet

ROD/BOLT LENGTH
MUST BE APPROX.
7"
177.8mm
LESS THAN
CYLINDER HEIGHT
SHOWN WITH
MS1851S LOCK
CYLINDER
HEIGHT
THRESHOLD
DIA.
BOLT
FOR BOLT GUIDE:
DRILL & CSK FOR
#10-32 FLAT HEAD
SCREWS ON
INTERIOR
FACE OF STILE
BOTTOM EDGE
OF DOOR
BOLT
PROJECTION
THROW
CUT OFF TO
SUIT LOW
CYLINDER
HEIGHTS
SHOWN
EXTENDED
ANY BASIC
MS
®
DEADBOLT
6"
152.4mm
9"
228.6mm
7/8"
22.2mm
11/16"
17.5mm
9/16"
14.3mm
11/16"
17.5mm
5/8"
15.9mm
1/2"
12.7mm
29/32"
23mm
5/8"
15.9mm
4015 THRESHOLD BOLT
SEE BASIC MS
®
DEADLOCKS
MS1850S, MS1850SN, MS1950, MS1950-050
INSTALL ADAPTOR ARM IN LOCK FROM REAR WITH BOLT
RETRACTED AS SHOWN. DRIVE PIN THROUGH SLOTS
IN LOCK SIDE PLATES PASSING THROUGH HOLE IN THE
ADAPTOR ARM.
HOW TO ORDER 4015 THRESHOLD BOLT
Specify quantity and the following information. Order related products separately.
ADD DASH NUMBER FOR
"UNIVERSAL SIZE"
PACK AGING
4015 -18 -IB
IB Individually Boxed
If ordering in volume quantity for specific cylinder height, specify CYLINDER HEIGHT.
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related products,
available separately:
This product is compatible with the following products:
Accessories Deadlocks
4016 Header Bolt, 4085 Header Bolt. MS1850S(-050), MS1850SN(-050), MS1950(-050)
Dimensions Installation
Stile Preparation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
A-4
ACCESSORIES
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.