Specification Sheet

4000 Series MS
®
Deadlock Strikes add aesthetics
and finish to strike cutouts in jambs.
4000 Series MS
®
Deadlock Strikes
Function
The majority of Adams Rite MS
®
deadlocks are installed in metal construction where
the strike cutout can be simply a slot in the jamb. However, for aesthetic reasons or in
the case of the MS4002 for added security, many who specify the MS deadlock add
one of these strikes.
Specifications
4000 TRIM STRIKE
• A simple strike plate that can be surface mounted on a wood or metal jamb or
mortised flush. Furnished with two #10 flat head machine screws and two #10 flat
head wood screws.
• Material & Finish: Made of aluminum. Available in US28 (628), clear anodized,
313 dark bronze anodized, and 335 black anodized.
4001 BOX STRIKE
• Same trim plate as 4000, but with dust box added. Customarily
used only for wood construction where the dust box prevents
chips, sawdust, and other debris from entering strike. Furnished
with both wood and machine screws.
• Material & Finish: Trim plate is aluminum, box is steel
plated for corrosion resistance. Available in US28 (628)
clear anodized, 313 dark bronze anodized, and 335
black anodized.
MS4002 ARMORED STRIKE
• Same trim plate as 4000 and 4001, but backed up by a
massive steel doubler designed to prevent the method of
forced entry known as “jamb peeling”. Fits within aluminum
or other hollow jamb sections with trim face flush, the steel
completely hidden. Available flat or radiused, for pairs of
doors*, and to fit all MS
®
deadlocks, including the hookbolt
version in sliding doors (hookbolt use dictates door/jamb
gap of 1/8" or less). Unhanded, may be used with RH or LH
swinging or sliding doors.
*Can be used with two-point and three-point MS locks.
• Material & Finish: Trim plate is aluminum. Reinforcement
doubler is steel plated for corrosion resistance. Available in
US28 (628), clear anodized, 313 dark bronze anodized, and
335 black anodized.
4003 ANSI STRIKE
• The 4003 strike is designed for ANSI applications for use with
the MS1850SN Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
605 bright brass, 626 satin chrome and 119 black and 121
dark bronze.
4005 THRESHOLD STRIKE
• The 4005 Threshold Strike is designed for a drop-bolt such
as 4015 Threshold Bolt or 4016 Header Bolt in non-metal
installations such as wood or concrete.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel.
4006 FLOOR STRIKE
• Similar to 4001 Box Strike, the 4006 Floor Strike is a trim plate
with dust box added for strike slot cut into metal thresholds.
Designed for use with the 1830 Bottom Rail Deadlock.
• Material & Finish: Trim plate is stainless steel. Available in
630 satin stainless steel, 119 black and 121 dark bronze.
OPTIONS
• Specify flat or radius shape of trim plate, round or
square corners and lock compatibility when ordering.
4003-01 ANSI-dimensional lipped strike also available
for MS1850SN Deadbolt.
4000 SERIES MS
®
DEADLOCK STRIKES
ALUMINUM
HOLLOW
METAL
WOOD
MS4002-012
4000-012
4001-032
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
ACCESSORIES
A-1