Specification Sheet

1-15/32"
37.3mm
5/8"
15.9mm
1-9/32"
32.5
mm
7/16"
11.1mm
1-1/2"
38.1mm
DIA.
1-11/32"
34.1mm
23/32"
18.3
mm
1/8"
3.2mm
1/4"
6.4mm
1-5/8"
41.3mm
DIA.
STILE WALL
MINIMUM
CYLINDER
CAM TO
SHOULDER*
LOCK
BACKSET
LOCK FACE
CUTOUT
CYLINDER LENGTH
(INCLUDING CAM)*
SECURITY RING
(HARDENED STEEL)
SPACER(S) TO FIT
STILE WALL IF THINNER
THAN NORMAL
OR
RETAINER
RING
*Contact factory regarding
non-standard dimensions
DIA.
NOTE:
Guard may be used on outside only
or on both outside and inside of a
double-cylinder lock.
FACE “OPEN” SIDE OF RETAINER TOWARD
MINIMUM CLEARANCE DIRECTION (TOWARD
NOSE OF DOOR ON 7/8” OR 31/32” BACKSET
LOCKS, AWAY ON 1-1/8” BACKSET).
3/8"
9.5
mm
MS4043 CYLINDER GUARD
MS4043 CYLINDER GUARD
Specify quantity and the following information. Order related products separately.
PRODUCT NO. STILE WALL & CYLINDER FINISH
MS4043 -01 -130
Stile Wall Cylinder 119 To match 335 Black Anodized
00 1/8"
5 or 6 pin
121 To match 313 Dark Bronze Anodized
01 1/4"
5 or 6 pin
130 To match 628 Clear Anodized
02 1/8"
1.31” to 1.435” long
COMPATIBLE PRODUCTS This product is compatible with the following products:
Deadlocks Deadlatches Flushbolts Exit Devices
1830, MS1837, MS1850S(-050), MS1850SN(-050), MS1861,
1875, MS+1890, MS1950(-050), 2190, 2290
4300, 4510, 4530, 4900,
4920AN
1870, 1870HM 8300, 8400
Installation
Dimensions Stile Preparation
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
C-6
CYLINDERS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.