Specification Sheet

4036 MORTISE CYLINDER 4066 THUMBTURN
Cylinders “By Others”
Adams Rite deadlocks and latches are designed
to accept standard 1-5/32" mortise cylinders of all
popular makes. This means that the entrance can
be keyed to match the system used throughout
the building on other types of doors. Care must
be taken, however, to specify the proper cam
for each type of lock, as these are not generally
interchangeable. The cam shapes shown below
are available from the listed cylinder manufacturers
and will be supplied by them with the cylinder
when specified or available separately. Because
of variations in the attachment of cams to cylinders
and other construction differences, it is advisable
NOT to attempt using one manufacturer’s cylinder
with another’s cam.
HOW TO ORDER 4036 MORTISE CYLINDER
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. LOCK TYPE KEY OPTIONS FINISH
4036 -01 -01 -628
01 For MS Lock, 4900
Deadlatches, 2190, etc.
01 KD 313 Dark Bronze Anodized
02 For 4070 Deadlock 02 KA2 335 Black Anodized
03 For 2331 Deadlock 50 Set 50 keyed alike 628 Clear Anodized
HOW TO ORDER 4066 THUMBTURN
Specify quantity and the following information.
Order related products separately.
PRODUCT NO. LOCK TYPE FINISH
4066 -01 -130
01 For MS Lock, 4900
Deadlatches, 2190, etc
130 To match 628
Clear Anodized
02 For 4070 Deadlock 313 Dark Bronze Anodized
03 For 2331 Deadlock 335 Black Anodized
DIMENSIONS OF CAM TO OPERATE THE FOLLOWING ADAMS RITE PRODUCTS:
Deadlocks Deadlatches Flushbolts Exit Devices Trim
1830, MS1837, MS1850S(-050), MS1850SN(-050),
MS1861, 1875, MS+1890, MS1950(-050), 2190, 2290
4300, 4510, 4530,
4900, 4920AN
1870, 1870HM,
1877, 4781 w/8650
8300, 8400, 8600
w/8650
3080, 3090
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± .060
FOR 2190 TR* = A - B
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
DIM “A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
Dimensions
-01
-02 -03
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.
C-4
CYLINDERS
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.