Specification Sheet

The 4024, 4025, 4026 Cylinder Pulls are designed to
operate Adams Rite MS1847 Deadlocks and the 5017
Wood Door Deadlock.
4024, 4025, 4026
Cylinder Pulls
Function
Designed for use with Adams Rite MS1847 Deadlocks and 5017 Wood Door
Deadlock, these surface mounted pulls allow a sliding glass door to be keyed-in
with other types of doors which have key-in-knob or mortise cylinder locks.
4024 Cylinder Pull
The 4024 five pin tumbler cylinder is smaller than the 4025
Cylinder Pull and it is symmetrical, designed for mounting door
pull or other trim plate. Can be mounted directly on stile where
lock mechanism is mounted on inside surface of stile rather
than mortised.
4025 Cylinder Pull
The 4025 five pin tumbler cylinder has mounting holes spaced
to allow clearance around MS1847 Deadlock mechanism for
long through-the-stile mounting screws.
4026 Cylinder Pull
A five pin tumbler cylinder, the 4026 Cylinder Pull is
designed for use with 5017 Wood Door Deadlock for wood
door applications.
Specifications
TRIM FINISH
• Zinc alloy housing. Standard finish: 130.
Cylinders are brass.
CYLINDER BOTH SIDES
• A pair of 4025 Cylinder Pulls can be mounted opposite
each other with long machine screws. Security is
maintained since each side offers access to only one
screwhead. Both screws would have to be removed to
operate the lock without its key. Specify 4025 CYLxCYL set.
OPTIONS
• CYLINDER MAKE: Pulls available with Schlage or Weiser
Keyway cylinders.
4024, 4025, 4026 CYLINDER PULLS
4024
4025
CYL X CYL
4025
ANSI/BHMA 156.5–2010 E 19231
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
CYLINDERS
C-1