Specification Sheet

The 4600 Heavy Duty Designer Deadlatch Handles
are designed with a patented adjustable drive mechanism
to operate the 4300, 4500, and 4900 Series Deadlatches
and Dual Force 2190/2290 Interconnected Deadbolt/
Deadlatch locksets.
4600 Heavy
Duty Designer
Deadlatch Handles
Function
Designed to operate 4300, 4500, and 4900 Series Deadlatches with either an
upward or downward motion. 4600 Deadlatch Handles can be retrofitted in the
field onto the 2190/2290 Interconnected Deadbolt/Deadlatch. Shipped handed,
but easily reconfigured to accommodate either door swing (MV and MN handle
types cannot be re-handed). The patented adjustable drive mechanism allows the
escutcheon to be set back from the door edge at the time of installation to provide
additional clearance. Request-to-Exit (REX) switch optional to provide signal
when lever is actuated.
Specifications
DESIGN
• Designed to match the clean lines of a narrow stile door,
the 4600 Heavy Duty Designer Series Deadlatch Handles
combine aesthetics, function, and strength in a compact yet
robust package. Offered in a wide range of lever designs
and architectural finishes, the 4600 Series Deadlatch Handle
complements the most contemporary door systems.
HANDLES
• Available in standard and designer series levers to blend with
existing architecture or to create a new design statement.
Made from solid cast stainless, brass, or bronze, and finished
to match any design requirement. Standard series lever
styles (-01, -02, -03) are designed to return within 1/2" of the
door face, as required by code in some areas.
ESCUTCHEON
• Mounted base is secured by hidden screws and has two
large helical compression springs. A 1/4" square heat-
treated spindle is part of escutcheon assembly, which
interlocks with the cam plug. Finished to match lever.
OPTIONS
• Can be ordered for left or right hand door, but is easily
reconfigured in the field to accommodate either door swing.
Standard handles are for 1-3/4" thick doors. Available by
special order for doors up to 3-1/4". Fixed lever (dummy)
kit available – use part number DTK-4600. Through-bolt
mounting kit for back-to-back mounting on wood doors, use
part number TBK-4600-XX (specify door thickness).
STANDARD PACKAGE
• Packed individually with cam plug (as needed), fasteners,
and optional equipment specified.
4600 HEAVY DUTY DESIGNER DEADLATCH HANDLES
STANDARD SERIES:
01-CURVE
MD MI
MV
02-ROUND
ME MJ
MW
03-SQUARE
MG MN
DESIGNER SERIES:
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM
T-21