Specification Sheet

The 4560 and 4565 Deadlatch Handles easily unlock the
4300, 4500 and 4900 Series Deadlatches. These handles fit
solidly into the cylinder hole of the latch.
4560, 4565
Deadlatch Handles
Function
Designed to operate 4300, 4500 and 4900 Series Deadlatches by a natural
downward hand movement, these handles incorporate an activator cam disc
that mounts on the handles escutcheon and fits solidly into the cylinder hole of
the latch. Not intended for use as a door pull.
Specifications
4560 HANDLE
• ADA Compliant lever is shaped to fit the hand, with a
concave thumb-rest portion that tends to keep knuckles
and thumb safely away from the jamb, even on a short
backset narrow stile.
4565 HANDLE
• Thumbturn of minimum practical length is designed to
offer a firm grip to the fingertips. Ideal for doors where the
latch is operated infrequently or in emergencies only.
ESCUTCHEONS
• Both handles shown here use the same 1-3/8" x 4"
escutcheon, designed to match the clean lines of a narrow
stile door. A 1/4" square heat-treated spindle is part of
escutcheon assembly, which interlocks with the cam plug.
Finished to match lever.
CAM PLUGS
• Secured in latch body by cylinder setscrew, the plug is
also rigidly tied to handle escutcheon by hardened steel
pins. Handing can be reversed by removing a spring clip,
reversing the cam, and replacing the clip.
OPTIONS
• Can be ordered for left or right hand door, but is easily
reconfigured in the field to accommodate either door
swing. The standard handles shown are for 1-3/4" thick
doors. Available on special order for doors up to 3-1/4".
STANDARD PACKAGE
• Individually bagged and bulk-packed in cartons, up to
100 per carton.
4560, 4565 DEADLATCH HANDLES
4565
4560
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM
T-13