Specification Sheet

EFORCE
®
3090P, 3090C KEYLESS ENTRY
HOW TO ORDER EFORCE® 3090P, 3090C KEYLESS ENTRY
Specify quantity and the following information. Order related products separately.
PRODUCT NO. CREDENTIAL COMPATIBLE PRODUCTS FINISH
3090 P -01 -626
P 125 kHz HID® Prox
01 Adams Rite latches or 8000 Series Exit Devices, Yale 7200 series, Corbin
Russwin ED4000 series exit devices only
121 To match 313 Dark Bronze Anodized
C 13.56 MHz HID iCLASS 02 Adams Rite MS® deadlocks 626 Satin Chrome
CYLINDER CAM
• Operable by any standard 1-5/32"
diameter mortise cylinder with MS
®
cam dimensioned as shown. Cylinders
with MS
®
cams can be readily obtained
from most cylinder manufacturers. See
CYLINDERS section for cylinder make,
thumbturn and trim ring information.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6mm ± .127mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
RELATED PRODUCTS COMPATIBLE PRODUCTS
When purchasing this product, please consider the following related
products, available separately:
This product is compatible with the following products:
Accessories Cylinder Power Deadlocks Deadlatches Exit Devices
3090-CABLE 12’
Cable Extension Kit.
Key override for the
eForce 3090 by any
standard 1-5/32"
diameter mortise
cylinder with MS
®
cam.
PS-1 and 4612
Power Transfer
Device.
Compatible with Adams
Rite MS Deadlocks
including: MS1850S(-050),
MS1850SN(-050),
MS1950(-050).
4500 Series Standard
Duty Deadlatch.
4900 Series Heavy
Duty Deadlatch.
Adams Rite 8000 Series
Exit Devices in 31/32"
backset or greater.
DimensionsDimensions Stile Preparation
Installation
ONE WALL ONLY
INSTALL RIVNUT
C
L
OF CYLINDER
PREP
4X
ø
1-7/16"
36.5mm
3-7/8"
98.4mm
2"
50.8mm
1/2"
12.7mm
6-13/32"
162.7mm
5"
127mm
15-3/8"
390.5mm
7-19/32"
192.9mm
1-3/4"
44.5mm
11-15/16"
303.2mm
7/8"
22.2mm
1/4"
6.4mm
T-8
TRIM
All measurements are approximate and are provided for informational purposes only. Refer to the product Installation Instructions.
©2014, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company.