Specification Sheet

The eForce 3090P (Prox) and 3090C (iCLASS) Keyless
Entries provide maximum security with either HID
®
Prox or
iCLASS contactless card reader.
eForce
®
3090P, 3090C
Keyless Entry
Function
The eForce 3090P, 3090C is a hardwired keyless entry control for Adams Rite
deadlocks, deadlatches and exit devices, that is compatible with aluminum stile,
steel and wood door applications.
An authorized card presentation is confirmed with an audible beep and visual
change in the red/green LED indicator – displaying the locked/unlocked status. A
high-speed motor engages an internal clutch to enable the exterior lever handle
operation. Upon timeout, the lever operation is disabled until the next authorized
card presentation or key override. The MS
®
Deadlocks must always be relocked
manually when used with the eForce 3090P, 3090C Keyless Entry Trim.
Hardwired installation: 18-22 AWG recommended (seven conductor stranded and
shielded). 500 ft maximum distance to host.
Features
• Non-handed with clutched lever protection
• Key override via mortise cylinder (1" to 1 1/2" length
with MS
®
cam)
• Surface mounted with concealed fasteners (1-3/4" to 2-1/4"
door thickness)
• Temperature range: -31°F to 151°F (-35°C to 65°C) and
5-95% humidity (non-condensing)
Specifications
ELECTRICAL SPECS: eFORCE 3090P PROX
• Integrated HID
®
125 KHz Prox contactless card reader
• Interfaces with any Wiegand-compatible access
control system
• Recognizes HID
®
Prox 26-39 bit formats
• FCC Part 15 (USA & Canada)
• 12VDC/150mA average 300mA peak
ELECTRICAL SPECS: eFORCE 3090C ICLASS
• Integrated HID
®
13.56 MHz iCLASS Reader
• Supported credential formats:
• CLASS – ISO 15693
• CSN Read Only: MIFARE 14443A, DESFire – ISO
14443A, Sony Felica – ISO 14443C
• 12VDC/150mA average 300mA peak
HOUSING
• The sleek-looking eForce-3090P, 3090C measures
1-3/4" wide x 15-3/8" high, with Satin Chrome (626) and
Powdercoat Dark Bronze (121) finishes.
HANDLE
• Clutch-protected cast zinc alloy, finished to match housing,
field selectable handing.
COMPATIBLE LOCKING DEVICES
• The eForce 3090P, 3090C retrofits to Adams Rite MS
®
Series Deadlocks, 4500 and 4900 Deadlatches and
8000 Series Exit Devices in 31/32" backsets and greater.
Additionally, the 3090P/C is compatible with Yale 7200
Series and Corbin Russwin ED4000 Series exit devices
(check model number for availability).
OPTIONS
• Add Cable Extension Kit (12’) 3090-CABLE with connectors
to allow for wiring to run from installation site to hub.
STANDARD PACKAGE
• Individually boxed with installation instructions, owner’s
manual, and mounting hardware for metal door
applications from 1-3/4" to 2-1/4" thick. Shipping weight
approximately 5.5 lbs.
EFORCE
®
3090P, 3090C KEYLESS ENTRY
ELECTRIFIED
PRODUCT
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
TRIM
T-7