Specification Sheet

Ultraline
74R2 Electric Strike
Specications
FAIL-SAFE/FAIL-SECURE
Field selectable at time of installation.
CASE
Approximately 1" x 3-3/8" x 1-1/8" deep.
STRIKE OPENING
Bolt retainer jaw is stainless steel, measures 5/8" x 1-7/16"
x 1/2" deep.
MOUNTING PLATE/HOUSING
Made of zinc aluminum alloy and measure 1-5/8" x 9" x
1/2" deep. Standard finish in epoxy to match Clear, Dark
Bronze Anodized and Black Anodized finishes.
VOLTAGE
Field selectable to match power source of 12, 16, or 24
VAC/VDC.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 0.163 0.440
16 0.228 0.458*
24 0.084 0.230
*Requires 16 DC adapter (P/N VA 7400-16VDC)
STANDARD PACKAGE
Individually boxed with mounting plate shims, mounting
screws, and installation instructions. Shipping weight
approximately 2 lbs.
OPTIONS
ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified
products to ElectroLynx system.
16 VDC Adapter – VA7400-16VDC required when using 16
VDC power.
ULTRALINE 74R2 ELECTRIC STRIKE
74R2 Electric Strike is designed for narrow stile rim exit
devices with 1/2" Pullman type latchbolt. For use in aluminum
door jambs. Opens electrically under 35lbs. of preload.
Function
A semi-mortised strike for rim exit devices having 1/2" Pullman type bolts.
Provides electrical remote control, allowing door to open without actuation
of the exit device.
This non-handed strike features an ultra-compact design and a stainless steel
split-jaw with over 1500 lbs. of holding force in fail-secure mode. The strike
releases electrically with up to 35 lbs. of door “preload" (pressure exerted on
doors by air conditioning systems, warping or misaligned hardware which can
disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt
AC/DC power. Strikes are equipped with a quick connect plug-in type connector.
ALUMINUM
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
GRADE 1
E09321
ELECTRIC STRIKES
ES-27
800.872.3267 • Fax 800.232.7329
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14