Specification Sheet

MS1850S Series
MS
®
Deadlock
Specifications
CYLINDER BACKSET
• 7/8", 31/32", 1-1/8", or 1-1/2" only.
CASE
• Steel with corrosion-resistant plating, measures 1" x 6" x
depth. Depth varies by backset (see table on back of page).
BOLT
• 5/8" x 1-3/8" x 2-7/8" with 1-3/8" throw. Eight-ply laminated
stainless steel. Center ply has alumina-ceramic core to defeat
any hacksaw attack, including rod-type “super” hacksaws.
FACEPLATE
• Measures 1" x 6-7/8"
STRIKE
• See back of page for dimensions of strike slot which can
be cut in metal jamb. Trim plate, box strike, and armored
strike are available separately.
CYLINDER CAM
• MS1850S Deadlocks are operable by any standard
1-5/32" diameter mortise cylinder with MS
®
cam
dimensioned as shown. Cylinders with MS
®
cams can
be readily obtained from most cylinder manufacturers.
See CYLINDERS section for cylinder make, thumbturn
and trim ring information.
OPTIONS
• For jambs too narrow to accept the long bolt, the
MS1850S-050 offers a shorter bolt with hook shape to
provide equal security against door-prying attempts.
1850S-020 short throw without hook is also available.
Second and third point locking bolts are available for pairs
of doors. All use any make standard mortise cylinder and
thus can be keyed into systems with other types of doors.
“SCHOOLHOUSE” version, also available, is modified
so that operation from inside is “unlock only”. This lock is
handed and must be specified LH or RH. Specify Series
SCH1850S. Same faceplate and backset options as
Series MS1850S. Operation from inside, with standard
Adams Rite 4066 Turn or with 4550 Deadlock Lever. For
wood or hollow metal, see MS1850SN.
STANDARD PACKAGE
• Individually boxed with machine screws for mounting.
Cylinders and/or thumbturns available separately.
Shipping weight: 1-1/2 lbs.
MS1850S SERIES MS
®
DEADLOCK
ALUMINUM
GRADE 1
E8211
The MS1850S Deadlock utilizes a laminated stainless steel
bolt, activated by a pivot mechanism to provide maximum
security for a single leaf narrow stile door.
Function
A huge bolt of laminated stainless steel, nearly three inches long, activated by an
uncomplicated pivot mechanism, has made this basic MS
®
Deadlock the standard
of the narrow stile door industry. The length of this bolt provides maximum
security for a single leaf door, even a very tall and flexible one or an installation
where the gap between the door and jamb is greater than it should be.
Operation
360° turn of key or thumbturn throws or retracts the counterbalanced bolt. Key
can be removed only when bolt is in a positively locked or unlocked position. Lock
accepts any standard 1-5/32" diameter mortise cylinder or thumbturn from either
or both sides. Cylinder must have MS
®
dimensioned cam.
B
LOCK CASE
CAM
TR
A
DOOR CENTERLINE
*TOLERANCE: ± 1/16
DOOR STILE
TRIM RING
CYLINDER
TR* = A + .125 – B TR* = A + .132 – B
FOR MS
®
LOCKS: FOR 4500 SERIES LATCHES:
“Dim A”
R
R
1830
2190
2290
MS1837
MS1850S
MS1850SN
MS1861
MS1950
1875
MS
+
1890
4300
4510
4530
4900
4781
4920AN
8300
8400
8650
DEADLOCK
DEADLATCH
SERIES
SERIES
EXIT
DEVICES
1870
1870HM
1877
3080
3090
FLUSHBOLTS
TRIM
THIS CAM AVAILABLE FROM:
ADAMS RITE
ARROW
ASSA
BEST
CORBIN RUSSWIN
DORMA
FALCON
KABA-ILCO
MEDECO
SARGENT
SCHLAGE
WEISER
YALE
.120"
3.0mm
.182"
4.6mm
.334"
8.5mm
.620"
15.7mm
R
.721"
18.3mm
.950"
24.1mm
.334"
8.5mm
.800" ± .005"
20.3mm ± .127mm
.850" ± .005"
21.6
mm
± .127
mm
THIS CAM AVAILABLE
FROM ABOVE CYLINDER
MANUFACTURERS
ON SPECIAL ORDER
(OR MAKE FROM
STANDARD CAM)
THIS CAM AVAILABLE
FROM ALL CYLINDER
MANUFACTURERS
(STANDARD CAM)
Narrow stile doors require a trim ring to fill the gap remaining between the cylinder
shoulder and stile when a standard mortise cylinder is used. If the security of the
hardened steel Adams Rite MS4043 Cylinder Guard is not required, this ring may be
simply a length of 1.171 I.D. tubing. Its length varies depending on door thickness or
cylinder make and number of pins. The specific length required can be quickly
determined by the following formula:
DIMENSIONS OF CAM TO OPERATE:
DIMENSIONS OF CAM
TO OPERATE:
4070 SERIES DEADBOLT
DIMENSIONS OF CAM
TO OPERATE:
2331 DEADBOLT
CYLINDER TRIM RING FOR NARROW STILES
“ TR ” is trim ring length.
“
A ” is cylinder height (less shoulder but including cam).
“
B ” is one-half of door thickness.
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14
DEADL OCKS
DL-9