Specification Sheet

7270 Fire-Rated
Electric Strikes
Specifications
UL10C, CAN/ULC-S104, FIRE RATED 3 HR.
CASE
• Approximately 1" x 3-3/8" x 1-7/8" deep.
STRIKE LIP
• Basic 7270 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge.
STRIKE OPENING
• 3/4" x 1-7/16" x 5/8" deep. Bolt retainer jaw and strike lip
are stainless steel. Strike accepts bolt from a variety of
latchsets or mortise panic exit devices when it is centered
on strike.
FACEPLATE
• Measures 1-1/4” x 4-7/8”. Faceplate is flat, with
square corners.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of voltage in AC and DC for intermittent or
continuous duty. Assembled for fail-secure (locked when
unpowered) operation.
7270 FIRE-RATED ELECTRIC STRIKES
7270 Fire-Rated Electric Strikes with 4-7/8" faceplates are
designed for mortise or cylindrical locksets with up to 3/4"
latchbolt projection without a deadbolt. For use in hollow
metal door jambs.
Function
Remote electrical control of any door equipped with a mortise or cylindrical
type lockset with up to 3/4" latchbolt projection, without a deadbolt. Electrical
actuation unlocks strike jaw, releasing latchbolt so door can be opened
without operating latch itself. Extremely compact mechanism fits into jamb
sections as shallow as 1-7/8". Fire-rated in fail-secure mode.
F
ITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4mm
All 3/4" throw latches
require 1/8" minimum
door gap. Horizontal center
line of strike must match line
of mortise latchbolt.
HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
FIRE RATED
 HOUR
GRADE 1
E09321
ELECTRIC STRIKES
ES-15
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14