Specification Sheet

7240 Fire-Rated
Electric Strike
Specifications
UL10C, CAN/ULC-S104, FIRE RATED 3 HR.
CASE
• Approximately 1" x 3-3/8" x 1-5/8" deep.
STRIKE LIP
• Basic 7240 strike has lip of proper length for 1-3/4" thick
door that closes flush with jamb edge.
STRIKE OPENING
• 5/8" x 1-7/16" x 9/16" deep. Bolt retainer jaw and
strike lip are stainless steel. Strike accepts bolt from a
variety of latchsets.
FACEPLATE
• Measures 1-1/4 x 4-7/8”. Faceplate is flat, with
square corners.
VOLTAGE
• Available in 12 or 24 volt AC and DC. DC continuous units
are silent, AC intermittent units “buzz" on operation.
CURRENT DRAW/AMPS
VOLTS AC INTERMITTENT DC CONTINUOUS
12 1.42 0.33
24 0.74 0.17
STANDARD PACKAGE
• Individually boxed with mounting screws. Includes
mounting clips and adhesive shims for use where welded
tabs are omitted.
OPTIONS
• Available with two monitoring signal switches which sense
whether latchbolt is in strike and whether strike jaw is
blocked. Choice of voltage in AC and DC for intermittent or
continuous duty. Assembled for fail-secure (locked when
unpowered) operation.
7240 FIRE-RATED ELECTRIC STRIKE
7240 Fire-Rated Electric Strikes with 4-7/8" faceplates are
designed for cylindrical locksets with up to 5/8" latchbolt
projection. For use in hollow metal door jambs.
Function
Remote electrical control of any door equipped with cylindrical (key-in-knob/
lever) type locksets with up to 5/8" latchbolt projection. Electrical actuation
unlocks strike jaw, releasing latchbolt so door can be opened without
operating latch itself. Extremely compact mechanism fits into jamb sections
as shallow as 1-21/32". Fire-rated in fail-secure mode.
HOLLOW
METAL
UL 
BURGLARY
LISTED
ELECTRIFIED
PRODUCT
FIRE RATED
 HOUR
GRADE 1
E09321
FITS STANDARD
MOUNTING
TAB ANSI PREP
3/32"
2.4
mm
ELECTRIC STRIKES
ES-13
800.872.3267 • Fax [phone]
10027 S. 51st Street, Ste 102
Phoenix, Arizona 85044
www.adamsrite.com
ARM-014-9/14