Specifications

12.0 LIGHT BULB REPLACEMENT

14.0 B REPLACEMENT

In the event of a bulb failure, Instructions on how to change a bulb are as follows: -

• Unplug oven from wall receptacle and allow oven to cool completely.

• Remove screws (4 per light) and take glass off lamp unit.

• Remove bulb by unscrewing anticlockwise and replace with new bulb.

• Refit glass front taking care that gasket is in position around stainless steel

frame.

• Re-connect oven and test.

NOTE:

Bulbs can be ordered from Adamatic as part number B772-94-001

or sourced locally as 125v 25w SES oven bulb (300deg C)

FG 189 3-218 26 x18 UL 3 TRAY (COLOUR) Dunkindonut 2-08 RAC

known as smartbake in USA

SCREWS

Replacement bulb part number B721-67-001