ADAM-6521 Series Industrial Switches with 4 10/100 Mbps Ethernet Ports and 1 Fiber Port User Manual
Copyright The documentation and the software included with this product are copyrighted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Contents Chapter 1 Overview .......................................................... 2 1.1 1.2 1.3 1.4 Chapter Introduction ....................................................................... 2 Features ............................................................................. 3 Specifications .................................................................... 4 Ordering Information ........................................................ 5 2 Installation ......................................
ADAM-6521 Series User Manual vi
CHAPTER 1 2 Overview This chapter gives an overview of ADAM-6521 modules.
Chapter 1 Overview 1.1 Introduction The ADAM-6521 series consists of industrial-grade 10/100 Mbps Ethernet switches with fiber ports that make it possible to expand industrial networks fast and cost-effectively. In addition to four 10/100 Mbps Ethernet ports with RJ-45 connector, ADAM-6521 also provide one multimode fiber optic port, while ADAM-6521S provides one single-mode fiber optic port with a SC-type connector.
Easy Troubleshooting There are 6 LED indicators supplied that aid troubleshooting for ADAM6521 modules. Each port has a pair of LEDs to indicate link status and port activity. This makes it easy to monitor collisions, link status, power failure and data reception for on-site diagnostics. 1.
1.3 Specifications Communications Standard LAN Transmission Distance Transmission Speed IEEE 802.3, IEEE 802.3u, 802.
Environment Operating Temperature Storage Temperature Operating Humidity Storage Humidity MTBF -10~65°C (14~149°F), Stack : -10~60°C (14~140°F) -20~80° C (-4~176°F) 20 ~ 95% (non-condensing) 0 ~ 95% (non-condensing) 1,150,000 hrs Certifications Safety EMC UL 60950-1, CAN/CSA-C22.2 No.60950 U.S.A.: FCC Part 15 CISPR 22 EU: EN55011, EN55022 Class A, EN61000-3-2/3, EN55024 IEC61000-4-2/3/4/5/6/8/11 1.
ADAM-6521 Series User Manual 6
CHAPTER 2 2 Installation In this chapter, you will be given an overview of the ADAM-6521 series hardware installation procedure.
Chapter 2 Installation 2.1 LED Indicators There are six network status LEDs located on the top panel of the ADAM-6521 modules. Their meaning is displayed in Table 2.1 below. Table 2.
2.2 Dimensions (units:mm) Figure 2.1: Bottom Figure 2.2: Top Figure 2.
2.3 Mounting the Module 2.3.1 Choosing a Mounting Method Due to its versatile and innovative design, the ADAM-6521 modules can be: • Fixed to a wall • Fixed to a DIN Rail • Piggyback Stacked Panel Mounting ADAM-6521 modules can be attached to a wall using the included brackets. Each bracket comes with four screws; first attach the bracket to the bottom of the ADAM-6521 module. Next, screw the bracket to the wall. Figure 2.
DIN-rail Mounting You can mount ADAM-6521 modules on a standard 35 mm DIN-rail. First, use two screws to attach the DIN-rail bracket to the ADAM module. Because ADAM-6521 modules use special hex head slotted shoulder screws, the tops of the screws will be even with the front of the module. Snap the module onto the DIN-rail. Figure 2.5: Attaching DIN Rail Bracket Piggyback Stack Several ADAM-6521modules can be stacked as seen in the figure below. Figure 2.
2.4 Connections 2.4.1 Connection to the Devices ADAM-6521 modules have one fiber and four RJ-45 ports. Each of the switch's twisted-pair ports can be used to connect a station or other devices. Use a straight-through twisted-pair cable with RJ-45 connectors on both ends. The twisted-pair cable extended from a twisted-pair port is called a “twisted-pair segment,” and it can be up to 100 meters long.
2.4.4 Power Connection You should take the following steps to connect ADAM-6521 modules to a power supply. 1. Connect the power cable to a 2-pin connector. 2. Connect the power cable to a power adapter. Figure 2.
ADAM-6521 Series User Manual 14
