ADAM-6520 5-Port Industrial 10/100 Mbps Ethernet Switch User Manual
Copyright The documentation and the software included with this product are copyrighted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Contents Chapter Chapter 1 Overview .......................................................... 2 1.1 Introduction ....................................................................... 2 1.2 1.3 1.4 Features ............................................................................. 3 Specifications .................................................................... 4 Ordering Information ........................................................ 5 1.1.1 1.1.2 1.1.3 1.1.4 1.1.
ADAM-6520 User Manual vi
CHAPTER 1 2 Overview This chapter gives an overview of the ADAM-6520 series' features and full specifications.
Chapter 1 Overview 1.1 Introduction ADAM-6520 modules are a 5-port industrial-grade 10/100 Mbps Ethernet switch for fast and cost-efficient network expansion. They connect up to 5 workstations and auto-detect both 10 and 100 Mbps network speeds. Moreover, ADAM-6520 modules support auto crossover to provide a flexible networking environment, connecting to the network via any port. ADAM-6520 modules provide three methods for mounting in an industrial environment: DIN rail, wall/panel, or piggyback stacking.
1.1.4 Wide Operating Temperature Range The operating temperature of ADAM-6520 is from -10~70° C, and ADAM-6520L is from 0~60° C, while ADAM-6520I offers a very wide range from -40 to 85° C. With such wide ranges you can use ADAM6520 modules in some of the harshest industrial environments that exist. 1.1.5 Easy Troubleshooting There are six LED indicators supplied to aid troubleshooting for ADAM6520 modules. Each port has a pair of LEDs to indicate link status and port activity.
1.3 Specifications Communications Standard IEEE 802.3, IEEE 802.3u LAN 10/100Base-TX Transmission Distance 100 m Transmission Speed up to 100 Mbps Interface Connectors 5 x RJ-45 LED Indicators Power, Link/Speed Power Power Connectors 2-pin removable screw terminal Power Consumption ADAM-6520L: Max. 3W ADAM-6520/6520I: Max. 2.
Environment Operating Temperature ADAM-6520 : -10~70° C (14 ~ 158° F), Stack : -10 ~ 60° C (14 ~ 140° F) ADAM-6520L:-10 ~ 60° C (14~140° F) Stack:-10~55° C (14 ~ 131° F) ADAM-6520I: -40~85°C(-40~185° F), Stack : -40 ~ 75° C (-40 ~ 167° F) Storage Temperature ADAM-6520/ADAM-6520L : -20~80° C (-4 ~ 176° F) ADAM-6520I: -50~95°C(-58~203°F) Operating Humidity 20 ~ 95% (non-condensing) Storage Humidity 0 ~ 95% (non-condensing) MTBF 1,580,000 hrs Certifications Safety UL 60950-1, CAN/CSA-C22.2 No.
ADAM-6520 User Manual 6
CHAPTER 2 2 Installation In this chapter, you will be given an overview of the ADAM-6520 series hardware installation procedure.
Chapter 2 Installation 2.1 Packing List Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately.
2.2 Top / Front / Rear View 2.2.1 Dimensions (units:mm) Figure 2.1: Top View Figure 2.2: Front Panel Figure 2.
2.3 LED Indicators There are six network status LEDs located on the top panel of ADAM6520 modules, one for power, and one for each of the network ports. Table 2.
2.4 Mounting Through versatility and innovative design, ADAM-6520 modules can be: • Fixed to a wall or panel • Fixed to a DIN-rail. • “Piggyback” stacked Panel Mounting ADAM-6520 modules can be attached to a wall using the included brackets. Each bracket comes with four screws; first attach the bracket to the bottom of ADAM-6520 modules. Next, screw the bracket to the wall. Figure 2.
DIN-rail Mounting You can mount ADAM-6520 modules on a standard 35 mm DIN-rail. First, use two screws to attach the DIN-rail bracket to the ADAM-6520 modules. Because ADAM-6520 modules use special hex head slotted shoulder screws, the tops of the screws will be even with the front of the module. Snap the module onto the DIN-rail. Figure 2.5: DIN-rail Mounting Piggyback Stack Several ADAM-6520 modules can be stacked as seen in the figure below Figure 2.
2.5 Network Connection 2.5.1 Connection to Devices Each of the switch’s twisted-pair ports can be used to connect to a controller or other devices. Use a straight-through twisted-pair cable with RJ45 connectors on both ends. The twisted-pair cable extended from a twisted-pair port is called a “twisted-pair segment”. It can be up to 100 meters long. You can connect any RJ-45 (MDI-X) station port on the switch to any device that uses a standard network interface such as a workstation or server. 2.5.
ADAM-6520 User Manual 14
