Specifications

@Adam Equipment Company 2006
3
3.0 INSTALLATION
3.1 UNPACKING YOUR BALANCE
Remove the balance from the carton carefully. It is recommended to keep the
packaging materials for storing or transporting again, if necessary. In the
carton you should find this balance together with:
 Pan
 Pan support
 A spare fuse (0.5)
 A plastic plug
 A power supply cord
 This instruction manual
3.2 LOCATING THE BALANCE
• The scales should not be placed in a location
that will reduce the accuracy.
• Avoid extremes of temperature. Do not place
in direct sunlight or near air conditioning
vents.
• Avoid unsuitable tables. The table or floor
must be rigid and not vibrate.
• Avoid unstable power sources. Do not use
near large users of electricity such as welding
equipment or large motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause
condensation. Avoid direct contact with water.
Do not spray or immerse the scales in water.
• Avoid air movement such as from fans or
opening doors. Do not place near open
windows or air-conditioning vents.
• Keep the scales clean. Do not stack material
on the scales when they are not in use.