Specifications

@Adam Equipment Company 2006
19
12.0 TROUBLE-SHOOTING
PROBLEMS POSSIBLE CAUSES SUGGESTIONS
No segments appears
in the display
-The AC adapter is not
plugged in
-The fuse is blown
-Plug in the AC adapter
-Change a new fuse
-Send your balance to
service center if it is not
rectified even after a new
fuse is changed.
The value displayed
changes constantly
-Unstable environment
-A foreign object is
caught between the pan
and balance housing
-Under hook port is open
-The object to be
weighed is not stable
(absorbs moisture or
evaporates)
-Move your balance to a
place where there is less
vibration or breeze
-Remove the foreign object
-Replace the cover on to
the port
The value displayed is
obviously wrong
The balance is not
calibrated
The balance was not
tared before weighing
The balance is not level
Calibrate your balance
properly
Tare before each weighing
Level the balance with
adjustable feet until the
bubble of the level
indicator is within the circle
completely