Specifications

@Adam Equipment Company 2006
16
10.0 RS-232C INTERFACE
This RS-232 supplied in the ADK balances is compatible with most of the
standard RS-232 interfaces as found on printers and PC’s.
10.1 RS-232C SPECIFICATIONS
Transmission form Full duplex, Asynchronous transmission, Bi-directional
Data Format Baud rate : 1200, 2400, 4800, 9600
Data bits: 8 bits
Parity: None
Stop bit: 1 bit
Code: ASCII
Data output mode
Auto print, press the [Print] key, command
Output data format ST, +010.000xx g <CR> <LF> <LF>
US, +010.000xx g <CR> <LF> <LF>
Note:
ST = Stable
US = Unstable
X=Space
<CR> = Carriage Return
<LF> = Line Feed
Connector DB-25P
Pin 1 Case Ground
Pin 2 Data Output
Pin 5 CTS, to RTS on PC or Printer
Pin 6 DSR to DTR on PC or Printer
Pin 7 Signal Ground
10.2 DATA OUTPUT MODES
1. AUTO PRINT MODE
There are three settings in the Auto Print mode.
Auto print A- When the balance becomes stable (stability indicator appears)- one
string of data will be output. Empty the pan and zero the display before each weighing
in Auto print A mode.
Auto print B - Whenever the balance becomes stable (stability indicator appears)-
one string of data will be output.
Auto print C - When the balance is connected to a printer or a computer and it is
turned on, the data in the balance will be output continuously unless the balance, the
printer or the computer is turned off.