Specifications

@Adam Equipment Company 2006
15
• Display check mode will be on showing all segments. Press [Print]
when the display check mode is on.
• Press [Mode] to scroll through the parameters from C1 to C7 and press
[Print] to set a new value for a parameter.
• Press [On/Off] to store the new settings. Display will be switched off.
• Your balance will work with the new parameter settings when you turn
on the display again by pressing [On/Off].
Parameter Description Settings
C1
No. of times of sampling
in the animal weighing
mode
C1 – 0 (8 times)
C1 – 1 (16 times)
C1 – 2 (32 times)
C2
Width of the motion
permitted in the animal
weighing mode
C2 – 0 (1000 digits)
C2 – 1 (2000 digits)
C2 – 2 (5000 digits)
C2 – 3 (10000digits)
C3
Zero track and tare
C3 – 0 (ON)
C3 – 1 (OFF)
C4
Baud rate
C4 – 0 (2400)
C4 – 1 (1200)
C4 – 2 (4800)
C4 – 3 (9600)
C5
Data output mode
(8-N-1)
C5 – 0 (Auto Print A)
C5 – 1 (Auto Print B)
C5 – 2 (only when [Print] key is pressed)
C5 – 3 (Auto Print C)
C6
Sound to confirm
pressing of a key
C6 – 0 (ON)
C6 – 1 (OFF)
C7
Stability bandwidth
C7 – 0 (1)
C7 – 1 (2)
C7 – 2 (4)
C7 – 3 (8)