Specifications

@Adam Equipment Company 2006
13
8.1 PARTS COUNTING
• Select the Counting mode by pressing [Mode]. It will display “0.”.
• Press [Cal]. It will display “-10-“. You may change the sample size
upwards by pressing the [Print] key or downwards by pressing [Mode].
The available options which are 5, 10, 15, 20, 25, 30, 35 and 40.
• Place 10 (or the selected number) samples on the pan and press
[Tare]. The display will show “10.” or the selected sample size.
• Remove the samples from the pan. It will display “0.”
• Place the number of unknown samples and the quantity will be
displayed.
• To change the weighing mode, simply press [Mode] and select the
desired weighing mode.
8.2 PERCENTAGE WEIGHING
• Select the percentage weighing mode by pressing [Mode]. It will
display “0.00”.
• Press the [Cal] key. It will display “-100-“. You may change the sample
size upwards by pressing the [Print] key or downwards by pressing the
[Mode] key. The available options which are 50, 100, 150, 200, 250,
300, 350 and 400 (50 to 400%).
• Place a sample or a weight as 100% (or any other percentage value as
above) reference weight on the pan and press [Tare]. The display will
show “100.00” or the selected value.
• Remove the sample from the pan. It will display “0.00”.
• Place an unknown sample and the display will show the weight as a
percentage of the reference weight.
• To change the weighing mode, simply press [Mode] and select the
desired weighing mode.