Specifications

@Adam Equipment Company 2006
11
6.3 WEIGHING-OUT
To remove a certain amount of material from a full container
• Place a container with sample in it onto the pan. The weight of all
things on the pan will be displayed.
• Press [Tare] to cancel the weight, "0.0g" will be displayed.
• Take material out of the container.
• The negative weight of the sample taken out will be shown.
• Stop when the target is reached.
6.4 DEVIATION WEIGHING
To measure the difference between a reference weight and an
unknown weight
• Place a weight or a sample as a reference on to the pan. The
weight of the reference will be displayed.
• Press [Tare] to cancel the weight, "0.0g" will be displayed.
• Remove the reference weight and place a part for comparison on
the pan.
• The difference between the comparison and reference weight will
be displayed either in positive or in negative value.
6.5 BELOW PAN WEIGHING
If you intend to determine specific gravity or to weigh a sample
immersed in a special liquid or atmosphere, you need below weighing.
An optional weighing underhook is available for this purpose.