Specifications

@Adam Equipment Company 2006
10
6.0 WEIGHING
6.1 SIMPLE WEIGHING
• Make sure nothing is on the pan.
• Place a sample on to the centre of the pan gently when "0.0g" is
displayed.
• Record the weight displayed when the arrow appears on Stab to
indicate that the reading is stable.
• Remove the sample.
• When a container is to be used, the weight can be tared. Place an
empty container on to the pan. The weight of the container will be
displayed. Press the [Tare] key to cancel the weight, “0.0g" will be
displayed.
• Place the sample to be weighed in to the container. The weight of
the sample will be displayed.
• Record the value displayed when the stability indicator appears.
• Remove all items on the pan.
6.2 WEIGHING-IN
To add material until the weight reaches a target
• Place an empty container on to the pan. The weight of the
container will be displayed.
• Press the [Tare] key to cancel the weight.
• Fill the sample into the container. The weight of the sample will be
displayed as it fills the container.
• Stop filling when the target weight is reached.
• If required press the [Tare] key to cancel the total weight.
• Repeat with the second material.