User's Manual

14 T10S SUBWOOFER MANUAL [ENGLISH]
SCENARIO A
→
CONNECTIONS FOR STEREO MIXER OR DAW:
→ Likewise, make corresponding connections [XLR to XLR or RCA to RCA] from the
output connections of the T10S to the signal inputs of your monitors.
→ Set the T10S CROSSOVER FREQUENCY to 80 Hz, the PHASE to 0°, and the LEVEL
control to its minimum setting [fully counterclockwise]. Continue on page 15.
SCENARIO B
→
CONNECTIONS EXTERNAL BASS MANAGEMENT
SYSTEM, SURROUND SYSTEM OR AVR:
→ Set T10S CROSSOVER frequency to BYPASS, the PHASE to 0°, and the LEVEL
control to its minimum setting [fully counterclockwise].
→ After all connections are made, turn on the equipment feeding the speaker system.
100-240 V ~
50/60 Hz
132 W max
100-240 V~, 50/60 Hz
190 W max
T 3.15 AL / 250 V
Remote Switch
Subwoofer Bypass
Crossover
80 Hz 120 Hz Bypass
Phase
180°
0°
A +4 dBu
Balanced
A -10 dBV
Unbalanced
Out
In
A -10 dBV
Unbalanced
Out
In
Level
Min
Max
0 dB
Right
Left
Out In InOut
Made in China
Caution
Risk of electrical shock
Do not open
Avis : Risque de choc electrique - Ne pas ouvrir
Warning: To reduce the risk of fire or electric shock
do not expose this equipment to rain or moisture
Avis : Ne pas exposer ce matériel à la pluie ou l’humidite afin
de reduire le risque d’inflammation ou de choc eléctrique
Berlin, Germany
Serial No.
LR
100-240 V ~
50/60 Hz
132 W max