User's Manual
Table Of Contents
- CONGRATULATIONS!
- CONTENTS
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 2. INTRODUCING T10S SUBWOOFER
- 3. OPTIMAL PLACEMENT OF
- YOUR SUBWOOFER
- 4. FEATURES
- 5. AUDIO CONNECTIONS AND LEVEL SETTINGS
- 6. USING CROSSOVER, PHASE, LEVEL &
- REMOTE CONTROLS ON THE REAR PANEL
- 7. TROUBLESHOOTING
- 8. MAINTENANCE
- 9. SHIPPING
- 10. ENVIRONMENTAL INFORMATION
- 11. EU DECLARATION OF CONFORMITY
- 12. WARRANTY TERMS
- 13. TECHNICAL DATA
11 T10S SUBWOOFER MANUAL [ENGLISH]
[2] CROSSOVER FREQUENCY – Three settings are provided: 80 Hz, 120 Hz and Bypass.
→ 80 Hz use this setting for ADAM Audio’s T Seriesnear field monitors or any
other professional monitors.
→ 120 Hz use this setting for smaller speakers that do not have sufficient low
frequency response or for monitoring according to cinema “x.1” LFE
[Low Frequency Effects] channel standards.
→
Bypass use this setting when using an external crossover or bass
management system.
[2] [3] [4]
[6]
[7]
[5]