User's Manual
Table Of Contents
- CONGRATULATIONS!
- CONTENTS
- 1. IMPORTANT SAFETY INSTRUCTIONS
- 2. INTRODUCING T10S SUBWOOFER
- 3. OPTIMAL PLACEMENT OF
- YOUR SUBWOOFER
- 4. FEATURES
- 5. AUDIO CONNECTIONS AND LEVEL SETTINGS
- 6. USING CROSSOVER, PHASE, LEVEL &
- REMOTE CONTROLS ON THE REAR PANEL
- 7. TROUBLESHOOTING
- 8. MAINTENANCE
- 9. SHIPPING
- 10. ENVIRONMENTAL INFORMATION
- 11. EU DECLARATION OF CONFORMITY
- 12. WARRANTY TERMS
- 13. TECHNICAL DATA
10 T10S SUBWOOFER MANUAL [ENGLISH]
4. FEATURES
[1] POWER STATUS LED – POWER INDICATOR: Next to logo on front.
→ Red “Standby” indicates that the T10S is plugged in, power is available and ready
to activate the power amplifier.
→
Green “Active/On” the LED will turn green when the subwoofer has just been
powered
up or when the input circuitry of the T10S detects an input signal. The
amplifier will remain active for 15 minutes after program stops and then return to
the red standby mode.
[1]