User Manual

15
English
11 . Technical Data
ADAM S2X — active 2-ways bass reex loudspeaker
*1 = long term IEC 265-8-Wrms / 10 min
*2 = nominal IEC 265-8 = Peak Power 5 µsec
*3 = pay attention to the selected voltage on the rearside of the speaker
Woofer
1
Basket ø 186 mm / 7.5”
Voice coil ø 50 mm / 2”
Cone material HexaCone
Cone midrange
•
Basket ø •
Voice coil ø •
Cone material •
X-ART tweeter
1
Diaphragm area 2420 mm
2
/ 3.5 inch
2
Equivalent diaphragm ø 56 mm / 2 ”
Velocity transform. ratio 4 : 1
Diaphragm weight 0,17 g
Built-in ampliers*
2
Woofer
(1/2)*
250 W / 350 W
Midrange
(1/2)*
•
Tweeter
(1/2)*
50 W / 100 W
AC Voltage
100-120 V~, 50/60 Hz
*3
220-240 V~, 50/60 Hz
*3
Controls
Input sensitivity (coarse) -20 to +8 dB (4 dB steps)
Input sensitivity (ne) -1,5 to +2 dB (0,5 dB steps)
EQ 80 Hz 0 to +6 dB (1 dB steps)
Low shelve > 6 kHz ±4 dB (1 dB steps)
High shelve < 150 Hz ±4 dB (1 dB steps)
Tweeter gain ±2 dB (0,5 dB steps)
General data
Freqency response 35 Hz - 50 kHz
THD > 80 Hz ≤ 0,8 %
Short time ≥ 110 dB
Max. peak ≥ 120 dB
Crossover frequencies 2200 Hz
Input connectors analog XLR
Input connectors digital (optional) AES/EBU + SPDIF + word clock
Input impedance 10 kΩ
Weight 10,8 kg / 23.8 lb.
Magnetiically shielded optional
Height x Width x Depth 370 x 220 x 320 mm (14.5” x 8.5” x 12.5”)
Warranty 5 years
Operating temperature 0° C bis 40° C (32° F bis 104° F)
Storage temperature -30° C bis 70° C (-22° F bis 167° F)
Humidity Max. 90% not condensing