User Manual

6
a)
b)
c)
d)
e)
4. Quick Start / Connection
Before connecting the subwoofers to your audio components and the
power source make sure that both the subwoofer and your audio system
are switched off and set the level controls fully counterclockwise.
Input
Connecttheleftandrightline-levelsignalfrom
yoursignalsource(preamplier,mixer,etc.)to
the LEFT and RIGHT INPUT jacks. Use either
XLR(balanced)orRCA(unbalanced)cables.In
mostprofessionalapplicationsXLRwillbethe
bestchoice,whileRCAismorecommoninHiFi
applications.
Satellite Out
Connect the LEFT and RIGHT SATELLITE OUT
jacks to the inputs of the left and right main
powered speakers or the inputs of the amps
poweringthemainspeakers.
Checkifthespeciedvoltagematchesthevoltageofthepowersupplyyou
use.Ifthisisnotthecasedonotconnectthesubwooferstoapowersource!
Pleasecontactyourlocaldealerornationaldistributor.
Ifthevoltagesmatch,usetheincludedpowercablestoconnectthesubwoofer
totheACsockets.
Switchonthemainon/offswitchesonthebackpanelofthesubwoofers.
Switchonyouraudiosystemandadjustthevolumeofboththeaudiosystem
andthesubwoofercarefully.
g. 2: Inputs
g. 3: Outputs