User manual

ELYLITE
®
CURV COMPOSITE PANEL
The Elylite
®
Curv panels are composed of two self-reinforced polypropylene skins combined with a
honeycomb core (HC), joined together by adhesive bonding. The panels consist of polypropylene (PP)
with a thin (70 micron) protective layer of PET and are consequently very cost effective and even
easy to glue.
These ultra light weight panels are designed to meet the highest performance characteristics in
stiffness and impact resistance, and are easily recyclable. The panels have been tested at tempera-
tures as low as -30°C. Unlike typical polymer materials, the Curv material is known not to show any
brittleness even at extremely low temperatures.
Composition
• Polypropylene honeycomb core with a density of 60 kg/m
3
.
• Two Curv skins of 0.92 mm. The skins are a 100% polypropylene (PP) composite; they consist of a unique woven structure of stretched PP bers,
protected by a thin (70 micron) layer of PET.
• Joined together by a high performance adhesion system.
Dimensions
Thickness 9.7 mm
Size 1250 x 2850 mm
Colors
Black / grey
(Black Curv skins are UV-resistant)
Weight
2.4 kg/m²
Deflection
Deflection (mm) (*) L = 1000 mm, W = 1000 mm, P = 100 N/m
2
(Mtot = 10 kg)
Panel of 9.7 mm 12.00
(*) calculated values including bending and shear stiffness.
Impact resistance
The Curv skins have an exceptionally high resistance to impact.
Permanent deformation (mm) M = 2 kg, H = 1000 mm, diameter = 20 mm
Sandwich with 0.92mm Curv as skin 1.83
Sandwich with 1mm aluminium as skin 6.58
Fire behavior
Uncoated Curv skins correspond to Class B2 according DIN 4102 which is described as “normal
flammability”.
The polypropylene honeycomb core material is estimated to correspond to Class B2.
Weather resistance
• Elylite
®
Curv composite panels are stable within a temperature range from -40 °C to +80 °C.
• Elylite
®
Curv composite panels are resistant to salt water, oil, fats and most other agents.
• Black Curv skins guarantee excellent UV-protection and do not show any signicant signs of ageing compared to other similar polymer materials.
• Water absorption of the panels is minimal.
Elylite
®
Curv is a registered trademark of Elytra nv, Belgium.
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: [phone] e-mail: [e-mail]
Información sobre el uso de la espuma autoadhesiva
0193xxS
Debido al proceso de fabricación, es posible que la lámina de soporte con adhesivo sobresalga de los bordes de la espuma. Además, debido al transporte o
almacenamiento, es posible que se formen pliegues en la lámina.
Si la lámina de soporte se retira con brusquedad o demasiado rápido, puede que la capa adhesiva quede en parte adherida a la lámina de soporte y se
despegue de la espuma.
Esto se puede evitar fácilmente con solo presionar la parte despegada de la lámina de soporte utilizando el borde de la mano, el canto de una regla o algo
similar. A continuación, podrá retirar la lámina de soporte limpiamente y sin problemas.