User manual

ELYLITE
®
CURV COMPOSITE PANEL
The Elylite
®
Curv panels are composed of two self-reinforced polypropylene skins combined with a
honeycomb core (HC), joined together by adhesive bonding. The panels consist of polypropylene (PP)
with a thin (70 micron) protective layer of PET and are consequently very cost effective and even
easy to glue.
These ultra light weight panels are designed to meet the highest performance characteristics in
stiffness and impact resistance, and are easily recyclable. The panels have been tested at tempera-
tures as low as -30°C. Unlike typical polymer materials, the Curv material is known not to show any
brittleness even at extremely low temperatures.
Composition
• Polypropylene honeycomb core with a density of 60 kg/m
3
.
• Two Curv skins of 0.92 mm. The skins are a 100% polypropylene (PP) composite; they consist of a unique woven structure of stretched PP bers,
protected by a thin (70 micron) layer of PET.
• Joined together by a high performance adhesion system.
Dimensions
Thickness 9.7 mm
Size 1250 x 2850 mm
Colors
Black / grey
(Black Curv skins are UV-resistant)
Weight
2.4 kg/m²
Deflection
Deflection (mm) (*) L = 1000 mm, W = 1000 mm, P = 100 N/m
2
(Mtot = 10 kg)
Panel of 9.7 mm 12.00
(*) calculated values including bending and shear stiffness.
Impact resistance
The Curv skins have an exceptionally high resistance to impact.
Permanent deformation (mm) M = 2 kg, H = 1000 mm, diameter = 20 mm
Sandwich with 0.92mm Curv as skin 1.83
Sandwich with 1mm aluminium as skin 6.58
Fire behavior
Uncoated Curv skins correspond to Class B2 according DIN 4102 which is described as “normal
flammability”.
The polypropylene honeycomb core material is estimated to correspond to Class B2.
Weather resistance
• Elylite
®
Curv composite panels are stable within a temperature range from -40 °C to +80 °C.
• Elylite
®
Curv composite panels are resistant to salt water, oil, fats and most other agents.
• Black Curv skins guarantee excellent UV-protection and do not show any signicant signs of ageing compared to other similar polymer materials.
• Water absorption of the panels is minimal.
Elylite
®
Curv is a registered trademark of Elytra nv, Belgium.
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: [phone] e-mail: [e-mail]
Hinweise zur Verarbeitung des selbstklebenden Schaumstoffs
0193xxS
Bedingt durch den Herstellungsprozess kann die Trägerfolie mit der Klebstoffschicht über die Ränder des Schaumstoffs überstehen. Außerdem kann es durch
Transport oder Lagerung zur Faltenbildung in der Trägerfolie kommen.
Wird die Trägerfolie nun unvorsichtig oder zu schnell abgezogen, kann es passieren, dass die Klebstoffschicht stellenweise an der Trägerfolie haften bleibt
und vom Schaumstoff abgezogen wird.
Dies lässt sich ganz einfach vermeiden, indem man die Trägerfolie der zugeschnittenen Teile mit der Handkante, der Kante einer Holzleiste oder Ähnlichem
durch Darüberstreichen andrückt. Anschließend lässt sich die Trägerfolie sauber und problemlos abziehen.