Data Sheet

www.adamhall.com
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: [phone] e-mail: [e-mail]
R401 LD29 Plastazote Polyethylene Foam:
PROPERTIES AVERAGE VALUE
Density 29kg m3
Shore Hardness OO Scale 53
Compression set 25% comp 22hr
23 deg C
½ hr recovery
24 hr recovery
10.5%
3%
Compression Set 50% comp 22hr
23 deg C
½ hr recovery
24 recovery
23.5%
14%
Tensile Elongation 140 %
Operating Temperature - 70°C / + 100°C
Tensile Strength 375 kPa
Tear Strength 740 N/m
Horizontal Burning Characteristics
Automotive FMVSS 302 – Burn rate
Horizontal Burn Rate
5mm thick
13mm thick
Pass 8mm and thicker
1.7 mm/sec
1.2 mm/sec
The above figures are average values.
We recommend evaluation prior to use to ascertain the
suitability of the material for the application.
R401 LD29 Plastazote Polyethylene Foam