Data Sheet

Datum : 08.01.2014
Date/Date
D a t e n b l a t t / Technical Data Sheet / Fiche Technique
Material / Material / Matériel
Polyurethanweichschaumstoff
Polyurethane Foam / Mousse Souple de Polyuréthanne
SOLLWERTE
TOLERANZ
Rohdichte (kg/m³) DIN EN ISO 845
Piece Density / Densité nette
22,0 ± 2,0
Stauchhärte, CV40 (kPa) DIN EN ISO 3386-1
Compression load Deflection / Résistance à la Compression
2,7 ± 0,6
Zugfestigkeit (kPa) DIN 53571 A
Tensile Strength / Résistance à la Rupture
min. 80
Bruchdehnung (%) DIN 53571 A
Elongation at break / Allongement à la Rupture
min. 180
Zellzahl (1/cm)
Pores / Cellules au cm lin
15 ± 2
019430 / 019450
Die Durchführung der Analysen erfolgt in Anlehnung an die oben angegeben Normen.
Diese technischen Daten entsprechen Mittelwerten aus Messungen von festgelegten, jedoch unterschiedlichen Blockbereichen unserer Produktionspartien, aus denen Sie
beliefert werden. Die mit diesem Datenblatt übermittelten Werte entbinden Sie nicht von der Prüfung der Ware für Ihre eigenen Verfahren und Zwecke.
These technical data are based on mean values obtained by measurements in specific but different parts of the block you will be supplied with. This technical data sheet does not
release you from the obligation to carry out your own controls of the goods designed for your field of application.
Ces données techniques résultent des valeurs moyennes des mesures prises sur différentes parties du bloc bien déterminées duquel vous serez approvisionné. Toutefois les
valeurs mentionnées sur cette fiche technique ne vous délient pas de l'inspection de la marchandise pour vos propres besoins
.
Specifications / Valeurs nominales Tolerance / Tolérances
ELYLITE
®
CURV COMPOSITE PANEL
The Elylite
®
Curv panels are composed of two self-reinforced polypropylene skins combined with a
honeycomb core (HC), joined together by adhesive bonding. The panels consist of polypropylene (PP)
with a thin (70 micron) protective layer of PET and are consequently very cost effective and even
easy to glue.
These ultra light weight panels are designed to meet the highest performance characteristics in
stiffness and impact resistance, and are easily recyclable. The panels have been tested at tempera-
tures as low as -30°C. Unlike typical polymer materials, the Curv material is known not to show any
brittleness even at extremely low temperatures.
Composition
• Polypropylene honeycomb core with a density of 60 kg/m
3
.
protected by a thin (70 micron) layer of PET.
• Joined together by a high performance adhesion system.
Dimensions
Thickness 9.7 mm
Size 1250 x 2850 mm
Colors
Black / grey
(Black Curv skins are UV-resistant)
Weight
2.4 kg/m²
Deflection
Deflection (mm) (*) L = 1000 mm, W = 1000 mm, P = 100 N/m
2
(Mtot = 10 kg)
Panel of 9.7 mm 12.00
(*) calculated values including bending and shear stiffness.
Impact resistance
The Curv skins have an exceptionally high resistance to impact.
Permanent deformation (mm) M = 2 kg, H = 1000 mm, diameter = 20 mm
Sandwich with 0.92mm Curv as skin 1.83
Sandwich with 1mm aluminium as skin 6.58
Fire behavior
Uncoated Curv skins correspond to Class B2 according DIN 4102 which is described as “normal
flammability”.
The polypropylene honeycomb core material is estimated to correspond to Class B2.
Weather resistance
• Elylite
®
Curv composite panels are stable within a temperature range from -40 °C to +80 °C.
• Elylite
®
Curv composite panels are resistant to salt water, oil, fats and most other agents.
• Water absorption of the panels is minimal.
Elylite
®
Curv is a registered trademark of Elytra nv, Belgium.
Adam Hall GmbH · Daimlerstr. 9 61267 Neu-Anspach Germany
Tel.: (+49) 60 81 / 94 19 0 Fax.: [phone] e-mail: [e-mail]