Product Manual

©Adam Equipment 2017

6.0 CALIBRATION

It is possible to calibrate both the weighing results and temperature sensor. The mass calibration

allows you to calibrate with 20g or 50g for the PMB 53, 100g or 150g for the PMB 163, and 100g or

200g for the PMB 202. Although the analyzer is calibrated at the factory prior to shipping it is

recommended that you calibrate the moisture analyzer regularly for optimum performance. See

complete manual for full calibration instruction for temperature and mass (basic mass calibration can

be done via the menu structure section)

7.0 WARRANTY

Adam Equipment offers Limited Warranty (Parts and Labor) for the components failed due to defects

in materials or workmanship. Warranty starts from the date of delivery.

During the warranty period, should any repairs be necessary, the customer must inform the supplier

or Adam Equipment. The company or its authorised Technician reserves the right to repair or replace

any components at its own discretion. Any shipping costs involved in sending the faulty units to a

service centre is the customers responsibility.

The warranty will cease to operate if the equipment is not returned in the original packaging and with

correct documentation for a claim to be processed. All claims are at the sole discretion of Adam

Equipment.

This warranty does not cover equipment where defects or poor performance is due to misuse,

accidental damage, exposure to radioactive or corrosive materials, negligence, faulty installation,

unauthorised modifications or attempted repair or failure to observe the requirements and

recommendations as given in this User Manual.

Repairs carried out under the warranty does not extend the warranty period. Components removed

during the warranty repairs become the company property.

The statutory right of the purchaser is not affected by this warranty. The terms of this warranty is

governed by the UK law. For complete details on Warranty Information, see the terms and conditions

of sale available on our web-site.

Certificate of Calibration

This is to certify that the PMB series of moisture analyzers manufactured and distributed by

Adam Equipment at the time of manufacturing passed calibration tests to the tolerances as

outlined in the specifications section of this manual. Outside influences that may affect the

calibration since that time may cause a change in the calibration data.

Calibration Weighing: The Weights used to calibrate by the factory met AQTM / OIML

standards.

Calibration Standards: Factory calibration was performed as described in the calibration

section of the master manual.