Product Manual

10
©Adam Equipment 2017
3.2 RECALL TEST SETTINGS
Recalling the test settings can be done by selecting
PST RECALL then scrolling through the stored
settings using the up/down arrow keys to find the desired settings and then pressing the
[Setup/Enter] key to recall them. When the PST XX number has been selected the name given to the
test will be displayed
If PST 00 is selected the default test settings are recalled. These can never be cleared or overwritten.
If a test is not stored it is not displayed, i.e. If only 3 tests are stored then only those 3 plus the default
are seen when recalling the test settings.
Press the [Setup/Enter] key to recall PST 07.
The display will show:
The analyzer will then return to normal.
3.3 DELETE TEST SETTINGS
To delete a test setting select
PST DELETE, then scroll through the stored settings using the up/down
arrow keys to find the desired settings, and then press the [Setup/Enter] key to delete it.
The display will then show the next test setting stored or, if the memory is empty a message will be
shown. Press [Tare/Esc] to return to normal operation.
3.4 REVIEW TEST SETTINGS
To review the current settings press the [Test] key then advance through the settings by pressing the
[Setup/Enter] key at each option to retain the current value.
3.5 STORING TEST RESULTS
If the test settings include the printing of results being enabled, the test results will be stored using the
file name given to it automatically by the analyzer in the form RESxxxxx
The PMB is capable of holding up to 99 test results. If the analyzer memory is full the display will
show a
MEM FULL message. Delete some of the stored results to make room for new test results.
3.6 RECALLING TEST RESULTS
During normal weighing mode press the [Dspl] key. The display shows:
BREAD-3
PST 07
RECALL OK
PRINT