Product Manual

9
©Adam Equipment 2017
3.0 USING THE INTERNAL MEMORY SETTING
3.1 STORING TEST SETTINGS
It will be possible to store up to 49 test procedures/settings. There is also a factory default that is
permanently stored as PST 00.
To Store the current settings press the [PST] key. The display will give the user the option to store,
recall or delete a Preset Test. The display will show
PST STORE or PST RECALL or PST DELETE. Use
the up/down arrow keys, [Dspl] and [Test], to select either store or recall.
If Store is selected the display will then show
PST STORE XX with the number showing the ID for the
next empty location. For example if PST 01, 02, & 03 are already stored the next number is PST 04. If
the user wishes to overwrite a previously stored value they can change the number and continue.
Using the up/down arrow keys, [Dspl] and [Test]
Press [Setup/Enter] to select the PST number shown. If this number already has a test method
stored, the user is asked if the test should be overwritten.
To continue the user must press [Setup/Enter] to overwrite the old results and store new ones.
Pressing the [Tare] key will escape without clearing the old result.
When storing a test procedure the user has the option of adding a text or numeric name to the test.
The top display will show
PST NAME then show - - - - - - - - - . To enter a name, use the up/down arrow
keys to cycle through numbers and letters. Use the left right arrows to move the flashing digit to the
left or right.
— . / 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Up to 10 characters can be used to describe the test. Press [Setup/Enter] at any time to finish the
description. If no name is added the field will be shown as blanks when the name is shown during the
recalling process.
PST STORE
PST STORE
04
OVERWRITE?
BREAD-4 PST NAME