Product Manual

8
©Adam Equipment 2017
When the test has stopped the beeper will sound 3 short beeps (if enabled) and the display will show
the end result:
This display shows the test was automatically stopped as stability was reached in 12:44 minutes. If it
had stopped at the end of the time period it would have TSTOP on the top line and if manually
stopped it would have MSTOP.
At this time the final results are displayed. These results will include elapsed time of the test and final
% result.
Display other data by pressing the [Dspl] key to show the initial mass, final mass and the file name
used by the PMB to store the results in internal memory.
The final values for the results can be printed again to the serial interface by pressing the [Print] key.
If the print test function is enabled in the test settings then the PMB will also store the results into one
of 99 memories. See USING THE INTERNAL MEMORY SETTING
To return to normal weighing press the [Tare] key.
12:44 ASTOP
76.47%
Start mass
5.670g
End MASS
1.334g
RES00033
ST0RED