Product Manual

11
©Adam Equipment 2017
Pressing the [Dspl] or [Test] will change the option to PRINT, DELETE or DELETE ALL.
When the selection shows PRINT, press [Setup/Enter] and the display will show the first stored test
result using the file name given it when stored.
Press the [Dspl] or [Test] key to change the file name to the next available. When the desired test
result is found press the [Setup/Enter] key to recall the details and print them in the same format in
which they were stored.
Pressing [Tare] will return the analyzer to normal operation.
3.7 DELETING TEST RESULTS
When test results have been stored in the analyzer memory they can be deleted individually or all at
one time.
To delete all test results from memory, during normal weighing mode press the [Dspl] key until the
display shows
When the selection shows
DELETE ALL, press [Setup/Enter] to delete all test results. The display will
ask if you are sure you want to delete all results. Press [Setup/Enter] again. The display will count
down from 99 to 0 during the time it takes to remove all the files.
To delete an individual test result, continue as above except press the [Dspl] or [Test] to change the
option to
DELETE.
When the selection shows DELETE, press [Setup/Enter] and the display will show the first stored test
result using the file name given when it was stored.
Press the [Dspl] or [Test] key to change the file name to the next available. When the desired test
result is found press the [Setup/Enter] key to delete just this file. The display will show
DELETED then
the next available file. Press [Setup/Enter] to delete this file if desired. Pressing [Tare] will return the
analyzer to normal operation.
RES00032
DELETE ALL
RES00033