Product Manual
Table Of Contents
- 1.0 INTRODUCTION
- 2.0 TECHNICAL SPECIFICATIONS
- 3.0 UNPACKING THE SCALE
- 4.0 SETTING UP THE SCALE
- 5.0 KEYPAD AND DISPLAY
- Description
- Symbol
- 6.0 FUNCTIONS
- 6.1 bL = AUTOMATIC BACKLIGHT CONTROL
- 6.2 AVE = DISPLAY AVERAGING RATE
- 6.3 FIL = ADC FILTER RATE
- 6.4 bod = BAUD RATE SELECTION
- 6.5 cont = CONTINUOUS PRINTING
- 6.6 PIECE = PARTS COUNTING
- 6.7 StEPS = CHECK-WEIGHING FUNCTION (LOW-OK-HIGH)
- 6.8 CALIbr = CALIBRATION ROUTINE
- 6.9 rePL = RESULTS PRINTED AUTOMATICALLY OR MANUALLY
- 6.10 StAb = PRINT WHEN STABLE or INSTANTANEOUS
- 6.11 Aut = AUTOZERO FUNCTION
- 6.12 t1 = AUTOMATIC POWER SWITCH OFF
- 6.13 toP = HOLD MAXIMUM VALUE
- 6.14 nE = WEIGH IN NEWTONS
- 6.15 SuPP = Power supply voltage to PCB
- 7.0 COMMUNICATION WITH A COMPUTER/PRINTER
© Adam Equipment Company 2005
3
2.0 TECHNICAL SPECIFICATIONS
NEEDS REVISION
Models
Maximum Capacity
Readability
Repeatability
Linearity (±)
Internal counting resolution
Tare range
Stabilisation time
Units of measure
Interface
Operating temperature
Power supply
Calibration
Display
Pan size
Functions
Other features
AELP 500
AELP 2000
500 kg 2000 kg
200 g
500 g
200 g 500 g
200 g 1000 g
Up to 60,000 divisions
Full
Typically 3 seconds
Kg, g, t or lb
RS-232 bi-directional Interface
0 to 40° C
10.5 VAC external adapter
6 x AA size Alkaline Dry-cell batteries are suggested
Push button calibration
16
mm LCD displays
1250 x 80 x 60 mm
Averaging level, baud rate, print when
scale becomes stable or manually, print when
stable or at any time, auto-zero disable,
automatic power off, enable maximum value
hold, enable weighing in Newtons
Parts Counting and Check-weighing
Net weight
Resolution
200 g
500 g
28.3 kg