Product Manual





Notice:

• Avoid extremes of temperature, do not place in direct sunlight or near air

conditioning vents.

• Battery should be removed if the scale is not used for a long period of time.

• Do not stack material on the scale when it is not in use.

• Avoid high humidity that might cause condensation and keep away from

direct contact with water.

• Static may influence the weighing result, to reduce the static wipe the pan

and the scale with anti-static wipes.

• When the battery is lower than 3.7v, the battery symbol will flash to

indicate the low battery; when it is lower than 3.4v, the scale will turn off

automatically.

4.0 SET UP

4.1 ASSEMBLING OF SCALE

•

Put the scale on a stable and even table.

• Adjust the height of the feet to level the scale; the spirit level bubble should

be in the centre of the spirit level.

• Put the pan support in place, inserting the pan support pins into the holes on

top of the scale. Place the stainless steel pan on the support.

• Avoid excess force to weighing pan or the load cell could be damaged.

5.0 WEIGHING

5.1 BEFORE WEIGHING

Check the setting of the auto shut off function, see section 6.2. If the auto shut off

function is on, the scale will shut off after a period of time if the scale is not used

and it has a stable reading.

