User Manual



• To continue to other function settings, press [Tare/↵] to confirm the current

setting and show the next mode.

• The display will then show “BK Off”, “BK AU”, or “BK on” these are the

backlight function settings.

6.3 BACKLIGHT SETTING MODE

• Press the [FUNC/↑] key to change the state of backlight.

• “BK Off”: the backlight is off all the time.

• “BK AU”: auto backlight, backlight will come on if the display moves off of

zero.

• “BK on”: backlight will be on all the time.

• Press [Tare/↵] to confirm and move to the next setting. When you enter Hold

function mode, it will show "PCS on" or "PCS off".

6.4 PARTS COUNTING FUNCTION

• Press [FUNC/↑] to switch on or off the part counting function.

• "PCS of": part counting function is off.

• "PCS on": part counting function is enabled.

• Press the [Tare/↵] key to confirm the setting and move to the next setting.

The percentage weighing function has been entered when "PER on" or "PER

of" is displayed.

6.5 PERCENTAGE WEIGHING FUNCTION

• Press [FUNC/↑] key to switch on or off this function.

• "PER of ": percentage function is off.

• "PER on”: percentage function is enabled.

• Press the [Tare/↵] key to confirm the setting and move to the next setting.

The check weighing function has been entered when "CHK on" or "CHK of"

is displayed.