Product Manual

©AdamEquipment2018  24
4800: For setting the baud rate.
English: For setting the language.
AC off: Selecting the option of accumulating manually or turned off.
Manual: Selecting by output, e.g. manual.
ATP: Printer type.
Copy 1: Number of outputs.
Available options when selecting the ‘PC’ option (use the [Tare] key to select).
4800: For setting the baud rate.
Count: For selecting the output type.
1.0: For setting the count rate per second.
Available options when selecting the ‘Cmd’ option (use the [Tare] key to select).
4800: For setting the baud rate.
When the scale is at Zero the [Print] key will print weight at zero. After [MR] has been pressed
the print key will print the accumulation memory results.
8.3 USB SETUP
The USB interface uses parameters set by the user for baud rate and output type.
Press the [SETUP] key to access the parameters. Press [1] or [6] to scroll through the
options and [Tare]  on the ‘USB’ option to confirm.
When a parameter is entered by pressing [Tare], the displays will guide you through the
parameter selected and the options available.
The parameter and their functions are:
PC (continuous): For continuous printing.
Cmd (from device): For printing from a device.
Available options when selecting the ‘PC’ option (use the [Tare] key to select).
4800: For setting the baud rate.
Count: For selecting the output type.
1.0: For setting the count rate per second.
Available options when selecting the ‘Cmd’ option (use the [Tare] key to select).
4800: For setting the baud rate.