Manualshelf

Product Manual

ManualsBrandsAdam Equipment ManualsConstructionAdam Cruiser 16-Lb. Capacity Bench Counting Scale with Backlit LCD — 0.2g Increments
11121314151617181920
©AdamEquipment2018 14
6.2 TARING
• Zero the scale by pressing the [0] key if necessary. The indicator “0” will be
ON.
• Place a container on the platform and its weight will be displayed.
• Press [Tare] to tare the scale. The weight that was displayed is stored as the tare
value which is subtracted from the display, leaving zero on the display. The indicator
“Net” will be ON.
• As a product is added only the weight of the product will be shown. The scale could be
tared a second time if another type of product was to be added to the first one. Again
only the weight that is added after taring will be displayed.
• When the container is removed a negative value will be shown. If the scale was tared
just before removing the container, this value is the gross weight of the container and
any products removed. The indicator above “0” will also be ON because the
platform is back to the same condition as it was when the [0] key was pressed
last.
• If all product is removed leaving only the container on the platform, the indicator
“0” will also be on as the platform is back to the same condition as it was when
the [0] key was pressed last.
6.3 PARTS COUNTING